| ausmini https://www.ausmini.com/forums/ |
|
| Matt Reads SS Wheel Nuts https://www.ausmini.com/forums/viewtopic.php?f=2&t=77108 |
Page 1 of 1 |
| Author: | sitnlo62 [ Fri Jun 08, 2012 4:13 pm ] |
| Post subject: | Matt Reads SS Wheel Nuts |
I have Just picked up a set of Matt's Stainless Steel Wheel nuts. As a Machinist with access to all types of CNC and manual Machines I can honestly say these are a Very Nicely Made Item. For the Price he is asking for a set it was not worth my time and effort to make a set myself. These Nuts are "THE NUTS" so if you need a set Contact Matt, you can't go wrong 
Dave |
|
| Author: | drmini in aust [ Fri Jun 08, 2012 4:17 pm ] |
| Post subject: | |
Yeah I liked em so much I bought the 1st 2 sets of Contessas. 
I could have got them CNC machined by my other mate down the road, but Matt already had a program set up. |
|
| Author: | dodge [ Fri Jun 08, 2012 5:00 pm ] |
| Post subject: | |
are that low fat nuts ? |
|
| Author: | TheMiniMan [ Fri Jun 08, 2012 5:17 pm ] |
| Post subject: | |
Ah thanks guys, you`re all too kind but yeah. They really are good hey 
& dodge i can play with your nuts however you like
i still have one set of Dunlop ones left too don`t forget |
|
| Author: | min-E [ Fri Jun 08, 2012 7:14 pm ] |
| Post subject: | |
Pics anyone?
|
|
| Author: | 1962CKD [ Fri Jun 08, 2012 9:35 pm ] |
| Post subject: | Gauling |
Gauling, any issues? |
|
| Author: | drmini in aust [ Fri Jun 08, 2012 10:31 pm ] |
| Post subject: | Re: Gauling |
1962CKD wrote: Gauling, any issues?
You mean `galling'. 
Put a smear of antiseize on the threads when you fit them. |
|
| Author: | cush [ Fri Jun 08, 2012 11:29 pm ] |
| Post subject: | |
I can't wait to get my hands on Matt's nuts.. |
|
| Author: | TheMiniMan [ Sat Jun 09, 2012 12:12 am ] |
| Post subject: | |
Fatery will get you every where
|
|
| Author: | TheMiniMan [ Sun Jun 10, 2012 11:40 am ] |
| Post subject: | |
|
|
| Author: | min-E [ Sun Jun 10, 2012 12:47 pm ] |
| Post subject: | |
Oooh very nice. If ever I need some newies I'm hitting you up. |
|
| Author: | swiftden [ Sun Jun 10, 2012 10:49 pm ] |
| Post subject: | |
how much is a set Matt? i assume they are foe contessa mag wheels? |
|
| Author: | Panthersteve [ Mon Jun 11, 2012 10:05 am ] |
| Post subject: | |
swiftden wrote: how much is a set Matt? i assume they are foe contessa mag wheels?
http://www.ausmini.com/forums/viewtopic.php?t=76443 |
|
| Author: | TheMiniMan [ Mon Jun 11, 2012 10:55 am ] |
| Post subject: | |
yep, $12 each & they will last longer than your car
only one set of contessas left & one set of dunlops |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|