Hey guys, thanks for looking that up,
So.... I guess the fact that its an inch shorter it won't fit my car (1275).
Is the drive location slightly further away on the larger motor?
here tis....
| ausmini https://www.ausmini.com/forums/ |
|
| ID original part no please https://www.ausmini.com/forums/viewtopic.php?f=2&t=77386 |
Page 1 of 1 |
| Author: | phillb [ Sun Jul 01, 2012 2:07 pm ] |
| Post subject: | ID original part no please |
Could someone with an original parts list please id a NOS (BMC Aust) speedo cable I picked up. AYG 9304. (another in brackets but hard to read) Cheers |
|
| Author: | lisian_1275 [ Sun Jul 01, 2012 5:19 pm ] |
| Post subject: | Speedo Cable |
Hi Phil My parts book lists it as 2A9146, this is for the assy. inner/outer. Hope this helps. If not I could have a look on the Microfische for you. Thanks Ian |
|
| Author: | Morris 1100 [ Sun Jul 01, 2012 5:32 pm ] |
| Post subject: | |
Phil, that number is in the Clubman parts book as a Clubman speedo cable. |
|
| Author: | phillb [ Mon Jul 02, 2012 5:43 am ] |
| Post subject: | |
Thanks Is it for a centre speedo clubman because it is short? Shorter by an inch compared to a new centre speedo cable I have. |
|
| Author: | Morris 1100 [ Mon Jul 02, 2012 4:13 pm ] |
| Post subject: | |
phillb wrote: Thanks Now you mention it!
Is it for a centre speedo clubman because it is short? Shorter by an inch compared to a new centre speedo cable I have. It is the YG2S6 speedo cable. The poverty model with the centre speedo. The full story from the parts book YG2S6 = AYG9304 YG2S7 = AYG9305 YG2S8 = AYG9305 SPO 27 and 28 = NPN, Refer Smiths. |
|
| Author: | winabbey [ Mon Jul 02, 2012 5:23 pm ] |
| Post subject: | |
Morris 1100 wrote: phillb wrote: Thanks Now you mention it! Is it for a centre speedo clubman because it is short? Shorter by an inch compared to a new centre speedo cable I have. It is the YG2S6 speedo cable. The poverty model with the centre speedo. The full story from the parts book YG2S6 = AYG9304 YG2S7 = AYG9305 YG2S8 = AYG9305 SPO 27 and 28 = NPN, Refer Smiths. ... and in the Parts Amendment Advice #80 dated March 1973 (for PUB1052 Mini Clubman Series) it was replaced by AYG9305. I guess they figured it wasn't worth holding a separate part for the poverty model when a slightly longer one would do the job. By the way, the SPO 27 and 28 specifications are for the NSW Police vehicles which had a Stewart Warner Police Special calibrated speedo in place of the standard one. This required a special cable as the fitting on the SW speedo was different to the Mini (Smiths) speedo. Because the standard speedo was inoperative, anyone buying an ex-Police Cooper S or Clubman GT at the NSW Goverment auction would find a very low odometer reading. |
|
| Author: | Morris 1100 [ Mon Jul 02, 2012 5:38 pm ] |
| Post subject: | |
I just looked up the price from my December 75 price book. AYG9305 rec price was $4.65 and the trade price price was $3.72. |
|
| Author: | winabbey [ Mon Jul 02, 2012 5:48 pm ] |
| Post subject: | |
Morris 1100 wrote: I just looked up the price from my December 75 price book.
AYG9305 rec price was $4.65 and the trade price price was $3.72. By January 1977 it was $5.10 and $4.08. |
|
| Author: | phillb [ Mon Jul 02, 2012 8:01 pm ] |
| Post subject: | |
Hey guys, thanks for looking that up, So.... I guess the fact that its an inch shorter it won't fit my car (1275). Is the drive location slightly further away on the larger motor? here tis....
|
|
| Author: | Morris 1100 [ Mon Jul 02, 2012 8:03 pm ] |
| Post subject: | |
The only reason I can think for it being an inch shorter would be to save money. 
|
|
| Author: | phillb [ Mon Jul 02, 2012 8:09 pm ] |
| Post subject: | |
Morris 1100 wrote: The only reason I can think for it being an inch shorter would be to save money.
...it truly was the poverty pack
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|