| ausmini https://www.ausmini.com/forums/ |
|
| Hydro rear subframe https://www.ausmini.com/forums/viewtopic.php?f=2&t=77438 |
Page 1 of 1 |
| Author: | JC [ Wed Jul 04, 2012 8:02 pm ] |
| Post subject: | Hydro rear subframe |
I've taken the car for a roadworthy and spied it up on the hoist. If he fails the rear subframe due do a rust hole in it can I use a dry frame and swap the parts over. |
|
| Author: | drmini in aust [ Wed Jul 04, 2012 8:04 pm ] |
| Post subject: | |
Even if it's a late one with the holes for the hoses, it won't have the bayonet lugs to hold the bags in the frame.. Why not weld the old frame up? |
|
| Author: | JC [ Wed Jul 04, 2012 8:07 pm ] |
| Post subject: | |
He saw a weld on the front one and was unimpressed |
|
| Author: | drmini in aust [ Wed Jul 04, 2012 8:33 pm ] |
| Post subject: | |
Must be a heap of rear hydro frames up in Brisvegas, ask Matt Read... My mate has a few here but freight ^ might cost a bit. |
|
| Author: | TheMiniMan [ Thu Jul 05, 2012 9:38 am ] |
| Post subject: | |
yeah i have a few of em if you`re stuck john & if your rwc guy is unimpressed with a weld on a mini subframe then he`s a dork grind out the rust hole so it`s not rusty anymore & just leave it as a hole, make it nice 7 round like it`s meant to be there there are some pretty stoopid/dumb/ignorant rwc inspectors around,,, some think their sh!t doesn`t stink,,, nearly all of em think they own the power to crush you & your car they`re all mostly full of sh!t... find another guy to do the check for you |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|