ausmini :: View topic - Mini King, Huge sale of second hand Stock very cheap

I have asked for and been granted permission to Make this Announcement

We will be having a huge sale on the weekend 21 and 22 July
We will also be having our Famous sausage Sizzle on that weekend
I am trying to offer a lot of the second hand parts that I have at very cheap prices
A lot of which will be at scrap prices, I am trying to distribute a lot of these parts to MINI. owners while they are still avail,
In the hope that it helps future . Restorations & Repairs, As I will
not be carrying very much second Hand stock in future, So most of it has to go
There will also be some new parts that I have over stocks on at cheaper prices on the Day
To Mention some of the parts for sale 998 & 1098 Short Motors 998 and 1098 Cylinder Heads, ( there are some 1275 Heads avail but do need repair ) ( Some 1275 Bare Blocks ) plus loads of other parts
Please note I do not have stocks of disc brakes or R/Hand fuel tanks e.t.c for sale And I am not trying to get people to come expecting lots of Cooper S parts it is a genuine effort to distribute as much of the items I can before they go for Good
I truly am trying to do the Right thing by the Mini community So please Take advantage of this offer
John Smidt

PS
I am having a Clean up This weekend so any one around this sat sun may pick up some pre sale Bargins
PPS
I also have for sale a large lathe and a Mill for sale

It has been pointed out to Me, And I must say in a very nice way That I did Not Mention My address

22 Graham Hill Road Narellan 2567
Runs off Camden valley Way

Author:	John Smidt [ Thu Jul 12, 2012 2:57 pm ]
Post subject:	Mini King, Huge sale of second hand Stock very cheap
I have asked for and been granted permission to Make this Announcement We will be having a huge sale on the weekend 21 and 22 July We will also be having our Famous sausage Sizzle on that weekend I am trying to offer a lot of the second hand parts that I have at very cheap prices A lot of which will be at scrap prices, I am trying to distribute a lot of these parts to MINI. owners while they are still avail, In the hope that it helps future . Restorations & Repairs, As I will not be carrying very much second Hand stock in future, So most of it has to go There will also be some new parts that I have over stocks on at cheaper prices on the Day To Mention some of the parts for sale 998 & 1098 Short Motors 998 and 1098 Cylinder Heads, ( there are some 1275 Heads avail but do need repair ) ( Some 1275 Bare Blocks ) plus loads of other parts Please note I do not have stocks of disc brakes or R/Hand fuel tanks e.t.c for sale And I am not trying to get people to come expecting lots of Cooper S parts it is a genuine effort to distribute as much of the items I can before they go for Good I truly am trying to do the Right thing by the Mini community So please Take advantage of this offer John Smidt PS I am having a Clean up This weekend so any one around this sat sun may pick up some pre sale Bargins PPS I also have for sale a large lathe and a Mill for sale It has been pointed out to Me, And I must say in a very nice way That I did Not Mention My address 22 Graham Hill Road Narellan 2567 Runs off Camden valley Way From 9.00 AM to 5.00 PM

Author:	IwannaMini [ Thu Jul 12, 2012 3:31 pm ]
Post subject:
Whats the address John for people too lazy to look it up??

Author:	adamstuart [ Thu Jul 12, 2012 3:39 pm ]
Post subject:
Graham Hill road, Narellan Can't remember the number, but it's the one with the big MINI KING sign and an XJ6(maybe 12) Jag out front

Author:	John Smidt [ Thu Jul 12, 2012 4:16 pm ]
Post subject:
IwannaMini wrote: Whats the address John for people too lazy to look it up?? I thank you for That, I must say I respect The way You pointed this out to me 22 Graham Hill Road Narellan 2567 Runs off Camden Valley Way

Author:	IwannaMini [ Thu Jul 12, 2012 4:58 pm ]
Post subject:
Definitely wasnt a dig... I am just lazy. Do you have car shell parts as well? I am trying to score the rear end of a Mini to use in a light installation for a house interior project...

ausmini https://www.ausmini.com/forums/

Mini King, Huge sale of second hand Stock very cheap https://www.ausmini.com/forums/viewtopic.php?f=2&t=77559	Page 1 of 5

Author:	John Smidt [ Thu Jul 12, 2012 5:16 pm ]
Post subject:
I did not think You had a dig at Me, There are some body parts and some complete cars for sale as well, I hasten to add that most of them are good for parts only

Author:	IwannaMini [ Thu Jul 12, 2012 5:41 pm ]
Post subject:
Phew... So a Clean up This weekend where someone may pick up some pre sale Bargins you say.... hmmmmm clears diary

Author:	danny_ [ Thu Jul 12, 2012 5:42 pm ]
Post subject:
any complete rear seats without the seatbelt hump in the middle going up for sale?

Author:	John Smidt [ Thu Jul 12, 2012 5:46 pm ]
Post subject:
danny_ wrote: any complete rear seats without the seatbelt hump in the middle going up for sale? Yes there are some rear seats avail

Author:	Morris 1100 [ Thu Jul 12, 2012 5:50 pm ]
Post subject:
I really hope I can make it up for a visit.

Author:	mini-bear [ Thu Jul 12, 2012 6:09 pm ]
Post subject:	Re: Mini King, Huge sale of second hand Stock very cheap
John Smidt wrote: I have asked for and been granted permission to Make this Announcement We will be having a huge sale on the weekend 21 and 22 July We will also be having our Famous sausage Sizzle on that weekend I am trying to offer a lot of the second hand parts that I have at very cheap prices A lot of which will be at scrap prices, I am trying to distribute a lot of these parts to MINI. owners while they are still avail, In the hope that it helps future . Restorations & Repairs, As I will not be carrying very much second Hand stock in future, So most of it has to go There will also be some new parts that I have over stocks on at cheaper prices on the Day To Mention some of the parts for sale 998 & 1098 Short Motors 998 and 1098 Cylinder Heads, ( there are some 1275 Heads avail but do need repair ) ( Some 1275 Bare Blocks ) plus loads of other parts Please note I do not have stocks of disc brakes or R/Hand fuel tanks e.t.c for sale And I am not trying to get people to come expecting lots of Cooper S parts it is a genuine effort to distribute as much of the items I can before they go for Good I truly am trying to do the Right thing by the Mini community So please Take advantage of this offer John Smidt PS I am having a Clean up This weekend so any one around this sat sun may pick up some pre sale Bargins PPS I also have for sale a large lathe and a Mill for sale It has been pointed out to Me, And I must say in a very nice way That I did Not Mention My address 22 Graham Hill Road Narellan 2567 Runs off Camden valley Way Hi John, How have you been ? Long time no see ! question, you wouldn't have any MINI's for Sale atm I'm looking for one again since that I'm no longer with Steve. Mikey

Author:	John Smidt [ Thu Jul 12, 2012 6:27 pm ]
Post subject:
Hi Mikey, It has been a long Time, I would be worth a trip to have a look at one I have it is a Round Nose Mini, for sale on behalf of a customer and it Is in Pretty good shape,

Author:	mini-bear [ Thu Jul 12, 2012 6:52 pm ]
Post subject:
John Smidt wrote: Hi Mikey, It has been a long Time, I would be worth a trip to have a look at one I have it is a Round Nose Mini, for sale on behalf of a customer and it Is in Pretty good shape, wicked Thanks John ... see you then

Author:	bnicho [ Thu Jul 12, 2012 7:22 pm ]
Post subject:
What complete or complete-less-engine cars do you have available John? Thanks, Brett.

Page 1 of 5	All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/

Author:	John Smidt [ Thu Jul 12, 2012 7:37 pm ]
Post subject:
bnicho wrote: What complete or complete-less-engine cars do you have available John? Thanks, Brett. I have for sale on behalf of a customer A clubman GT shell with doors front and rear subframes ( No Motor ) also some round nose shells that need work also a Round nose mini with 1275 engine and disc brakes customers car I think it is a nice car I just had a good look at this The subframes have been changed to rubber cone type