Howmuch toe in should i dial in on the front of my mini to get good handling and tyre wear. Atm its towing 4 mm out

no toe-in... needs a teensy bit of toe out

do a search, it's in here somewhere

_________________
did I tell you that I won a trophy?

I did look but a mainly found people chatting about camber with back brackets. How come there is no toe in? Can i just have it so its 0

here's a good one - 1/16" toe out

http://www.ausmini.com/forums/viewtopic.php?t=65634

_________________
did I tell you that I won a trophy?

Thanks

Front wheel drive cars usually have toe-out because the wheels pull forward (and in) when they are driving. So, 1/16" toe-out at rest will equal zero or a little toe-in when the car is underway.

Al