Howmuch toe in should i dial in on the front of my mini to get good handling and tyre wear. Atm its towing 4 mm out
| ausmini https://www.ausmini.com/forums/ |
|
| Toe in https://www.ausmini.com/forums/viewtopic.php?f=2&t=77671 |
Page 1 of 1 |
| Author: | TUCK3r [ Wed Jul 18, 2012 9:16 pm ] |
| Post subject: | Toe in |
Howmuch toe in should i dial in on the front of my mini to get good handling and tyre wear. Atm its towing 4 mm out
|
|
| Author: | simon k [ Wed Jul 18, 2012 9:19 pm ] |
| Post subject: | |
no toe-in... needs a teensy bit of toe out do a search, it's in here somewhere |
|
| Author: | TUCK3r [ Wed Jul 18, 2012 9:21 pm ] |
| Post subject: | |
I did look but a mainly found people chatting about camber with back brackets. How come there is no toe in? Can i just have it so its 0 |
|
| Author: | simon k [ Wed Jul 18, 2012 9:24 pm ] |
| Post subject: | |
here's a good one - 1/16" toe out http://www.ausmini.com/forums/viewtopic.php?t=65634 |
|
| Author: | TUCK3r [ Wed Jul 18, 2012 9:26 pm ] |
| Post subject: | |
Thanks |
|
| Author: | 66S [ Thu Jul 19, 2012 7:11 am ] |
| Post subject: | |
TUCK3r wrote: How come there is no toe in?
Front wheel drive cars usually have toe-out because the wheels pull forward (and in) when they are driving. So, 1/16" toe-out at rest will equal zero or a little toe-in when the car is underway. Al |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|