| ausmini https://www.ausmini.com/forums/ |
|
| Clubman GT Stripes https://www.ausmini.com/forums/viewtopic.php?f=2&t=77730 |
Page 1 of 1 |
| Author: | Wedlock [ Mon Jul 23, 2012 1:49 pm ] |
| Post subject: | Clubman GT Stripes |
Can anyone be of help in helping find a set of the original type GT stripes? |
|
| Author: | Goldbrocade_62 [ Mon Jul 23, 2012 3:32 pm ] |
| Post subject: | |
Mini sport in South Australia http://www.minisport.com.au/prod1011.htm |
|
| Author: | Bubbacluby [ Mon Jul 23, 2012 7:44 pm ] |
| Post subject: | |
Or contact chop-chop on here. I have seen aset bought from mini-sport sa and I have a set from Chop chop and Chop chops are much better quality |
|
| Author: | Goldbrocade_62 [ Mon Jul 23, 2012 9:41 pm ] |
| Post subject: | |
Bubbacluby wrote: Or contact chop-chop on here.
I have seen aset bought from mini-sport sa and I have a set from Chop chop and Chop chops are much better quality I thought someone said chop chop stopped doing them |
|
| Author: | CARTER_GT [ Mon Jul 23, 2012 10:26 pm ] |
| Post subject: | |
Goldbrocade_62 wrote: Bubbacluby wrote: Or contact chop-chop on here. I have seen aset bought from mini-sport sa and I have a set from Chop chop and Chop chops are much better quality I thought someone said chop chop stopped doing them From what I've been told he still has a pile of them. Or another member has them all. I will leave it upto him if he comes out or not. |
|
| Author: | dalmeny [ Mon Jul 23, 2012 10:32 pm ] |
| Post subject: | |
No matter where you get them ask what 'Avery Paper' they are made on. The ones from Mini Sport SA are on Avery 700. If you can get them on no less than Avery 800, or even better Avery 900 they go one so much easier. The 700 will not mould much with heat, the 900 will mould better around the curves with some heat. |
|
| Author: | GT mowog [ Tue Jul 24, 2012 7:08 am ] |
| Post subject: | |
There was a set I had made and fitted by someone here. They were great for about 2 years and but now are lifting from the bump in the middle of the bonnet and a few other places. Considering the money he charged, I'd had considerably better results from the Minisport ones that I fitted myself. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|