I drilled holes in the bumper bar and attached them. Here's a pic
| ausmini https://www.ausmini.com/forums/ |
|
| Spotlight mounting.. https://www.ausmini.com/forums/viewtopic.php?f=2&t=77734 |
Page 1 of 1 |
| Author: | Speedwell Racer [ Mon Jul 23, 2012 8:27 pm ] |
| Post subject: | Spotlight mounting.. |
Hey Guys, Just looking into getting Spotties for the mini and would like a few pics of where and how people have mounted them to clubbies.. Cheers, Rhys. |
|
| Author: | frednutz&co [ Mon Jul 23, 2012 8:52 pm ] |
| Post subject: | |
used a nerf bar with a bracket welded between the upright bars nice and ridgid very little vibration |
|
| Author: | Rodney [ Mon Jul 23, 2012 8:52 pm ] |
| Post subject: | |
I drilled holes in the bumper bar and attached them. Here's a pic
|
|
| Author: | Irish Yobbo [ Mon Jul 23, 2012 9:16 pm ] |
| Post subject: | |
I bought an aluminium bar from the tip shop for $1, and bent it into a ¬_ shape. I then drilled holes behind the grill so that you can't see the bolts. |
|
| Author: | Speedwell Racer [ Mon Jul 23, 2012 9:55 pm ] |
| Post subject: | |
Anyone put them under the bumper either side of the number plate? Just makes it easier to get the grill off... Anyone have trouble getting the grill off with them on top of the bumper? |
|
| Author: | MiniKit [ Tue Jul 24, 2012 12:13 am ] |
| Post subject: | |
My 6" Spotties attached to the front bumper with straps from the mounting bolts (under the bumper) to under and behind the grill bolted to the front apron. No vibration and I can still get the grill off. Sorry about the pitch black of it all. Tis dark outside. If you want better photos let me know. And they are straight and level, it's just the angle of the photo. 
|
|
| Author: | Rodney [ Tue Jul 24, 2012 5:51 pm ] |
| Post subject: | |
Still dead easy to get the grill off 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|