Good morning all,

Have installed the wiring into the car but have the distributor in and I had to cut the wires to remove the ignitor from it(rubber grommet replaced)and had to cut the wires. I now have forgotten where they go so where does the RED and BLACK wire go to(I am assuming the coil but I am fuzzy on electrical stuff!!)

Nearly finished this pig so your help, as always, is welcomed. More to come WRT lights and the like.

Hooroo

_________________
Rob Forsyth
Miniot!!

Both go onto the coil- red to <+> and black to <-> terminal.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

Thanks Kev - I assumed this was the case but just making sure. Your advice is always welcomed and always prompt!

Hooroo

_________________
Rob Forsyth
Miniot!!

Just don't leave the ignition turned on and engine not running, as the module won't thank you.

Hint: don't wire the radio through the ignition switch...

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.