ausmini https://www.ausmini.com/forums/ |
|
shock absorber bracket bolts https://www.ausmini.com/forums/viewtopic.php?f=2&t=77773 |
Page 1 of 1 |
Author: | JC [ Wed Jul 25, 2012 10:15 pm ] |
Post subject: | shock absorber bracket bolts |
Anybody know the correct bolts I need to get? |
Author: | Mearcat [ Wed Jul 25, 2012 10:28 pm ] |
Post subject: | |
*runs out to garage and rummages through some bags of bolts... * ![]() 1/4" UNF x 3/4" long - 4 per shock mount. I'm sure it's supposed to have locking washers as well. |
Author: | drmini in aust [ Thu Jul 26, 2012 7:54 am ] |
Post subject: | |
If adding these brackets to a hydro car I'd clean the threads out first with a 1/4 UNF tap. After 40+ years they will be full of body proofing, paint, and/or rust. |
Author: | JC [ Thu Jul 26, 2012 8:30 am ] |
Post subject: | |
Thanks folks. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |