Yes, when looking at a FWD motor simply compare it to a RWD engine, cylinder 1 is at the front of the engine with all the pulleys, the end with the clutch is the back
.
| ausmini https://www.ausmini.com/forums/ |
|
| Number one cylinder https://www.ausmini.com/forums/viewtopic.php?f=2&t=77788 |
Page 1 of 1 |
| Author: | ricksmini [ Thu Jul 26, 2012 5:40 pm ] |
| Post subject: | Number one cylinder |
Hi all silly question when looking at the motor which cylinder is number one |
|
| Author: | sitnlo62 [ Thu Jul 26, 2012 5:47 pm ] |
| Post subject: | |
The one at the Radiator end.............. |
|
| Author: | willy [ Thu Jul 26, 2012 6:46 pm ] |
| Post subject: | |
aka the "front" of the engine. |
|
| Author: | Kennomini [ Thu Jul 26, 2012 8:24 pm ] |
| Post subject: | |
Yes, when looking at a FWD motor simply compare it to a RWD engine, cylinder 1 is at the front of the engine with all the pulleys, the end with the clutch is the back .
|
|
| Author: | ricksmini [ Thu Jul 26, 2012 8:36 pm ] |
| Post subject: | |
thanks fellas all sorted now just gotta get the thing to fire |
|
| Author: | drmini in aust [ Thu Jul 26, 2012 8:58 pm ] |
| Post subject: | |
ricksmini wrote: thanks fellas all sorted now just gotta get the thing to fire
If it's going bang... bang... and won't run the dizzy is fitted 180° out. See your other thread... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|