| ausmini https://www.ausmini.com/forums/ |
|
| Flare Metal Backing Strips https://www.ausmini.com/forums/viewtopic.php?f=2&t=77853 |
Page 1 of 1 |
| Author: | JEA [ Tue Jul 31, 2012 9:01 pm ] |
| Post subject: | Flare Metal Backing Strips |
Hi I was wondering if there is any tips or tricks involved in fitting the metal backing strips for flares. I notice that there is hole in the rear ones, does this hole line up with anything? I had a bit of a play tonight, but it looks like one of those jobs that could take forever if not done properly. Thanks in advance. James. |
|
| Author: | mini1990 [ Tue Jul 31, 2012 9:12 pm ] |
| Post subject: | |
Its a fiddly process. I believe they were actually welded to the body from the factory so that would be the best way. Alternatively you can rivet them on (which is what I did). I can take photos for you tomorrow if you want? |
|
| Author: | JEA [ Tue Jul 31, 2012 9:16 pm ] |
| Post subject: | |
Hi, that would be great. I had a crack tonight, but I ended up getting frustrated and calling it a night. |
|
| Author: | miniDave [ Tue Jul 31, 2012 10:17 pm ] |
| Post subject: | |
http://www.ausmini.com/forums/viewtopic ... c&start=15 bottom of the first page |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|