it`s pretty red too
| ausmini https://www.ausmini.com/forums/ |
|
| Foam for air filters https://www.ausmini.com/forums/viewtopic.php?f=2&t=77913 |
Page 1 of 1 |
| Author: | AWOODY [ Sun Aug 05, 2012 4:28 pm ] |
| Post subject: | Foam for air filters |
Is there a particular type of foam that people use for their ram flo air filters and where did you get it . |
|
| Author: | AWOODY [ Sun Aug 05, 2012 4:30 pm ] |
| Post subject: | Alternative interior lights |
Does anyone have a different interior light to the standard mini one , what have you got ? |
|
| Author: | AWOODY [ Sun Aug 05, 2012 4:31 pm ] |
| Post subject: | |
oops |
|
| Author: | TheMiniMan [ Sun Aug 05, 2012 4:55 pm ] |
| Post subject: | |
i buy a big slab of "Finer filter" foam lay the old bit ontop, mark it out, cut a round piece out & whack it in easy-peasy |
|
| Author: | TheMiniMan [ Sun Aug 05, 2012 4:55 pm ] |
| Post subject: | |
it`s pretty red too
|
|
| Author: | AWOODY [ Sun Aug 05, 2012 5:05 pm ] |
| Post subject: | |
Thats good it will match the roof. |
|
| Author: | ministar [ Sun Aug 05, 2012 6:20 pm ] |
| Post subject: | |
I've heard that the stock foam in ram flos is dodgy? Just switch straight to this finer filter foam? Is the replacement ram flo foam any good? |
|
| Author: | drmini in aust [ Sun Aug 05, 2012 8:01 pm ] |
| Post subject: | |
ministar wrote: I've heard that the stock foam in ram flos is dodgy? Just switch straight to this finer filter foam? Is the replacement ram flo foam any good?
Finer Filter went bust years ago and got absorbed by Unifilter. The standard Lynx Ramflo foam is rubbish, it is too restrictive and crumbles with age. And catches fire easy too. Unifilter foam is the best IMO, it is pre-oiled, is polyurethane so doesn't rot, and has less flow restriction than the Lynx stuff. P/nos: LNX300 for round 300 series SU Ramflo filters LNX400 from oval 400 series Weber Ramflo filters Cost $9.50 ea approx. Available online from Unifilter. Buy some filter oil, too. http://www.uniflow.com.au/contents/en-us/d141.html |
|
| Author: | SuperCooper [ Sun Aug 05, 2012 8:21 pm ] |
| Post subject: | |
Hey Dr where did u buy the slab of funer filter ? $$$$$? I need a slab just for the 7 port.... Cheers......you Rylestoning this yr? |
|
| Author: | drmini in aust [ Sun Aug 05, 2012 8:42 pm ] |
| Post subject: | |
SuperCooper wrote: Hey Dr where did u buy the slab of funer filter ? $$$$$?
I need a slab just for the 7 port.... Cheers......you Rylestoning this yr? Leigh it wasn't me, it was Matt... he must have an old slab 10 years old, unless Unifilter are selling Finer Filter foam (I've not checked the whole Unifilter site. There is no Finer Filter sita now AFAIK. Just buy the LNX400 pre-cut ones off Unifilter, $9.50 ea, see my post ^^^ Nope no Rylestone this year, $$$ has been tight lately. |
|
| Author: | SuperCooper [ Sun Aug 05, 2012 8:50 pm ] |
| Post subject: | |
Sorry Kevin! I have found the unifilter ones to be a little short in places allowing gaps around the edge of the cage. That's why I was hoping to be cut me own. They should book you as the support vehicle for the run! Thanks. |
|
| Author: | drmini in aust [ Sun Aug 05, 2012 8:58 pm ] |
| Post subject: | |
Ring or email Unifilter I bet they will sell you a slab. They are in Gosford now... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|