| ausmini https://www.ausmini.com/forums/ |
|
| Dare me to get a 48 DCOE Weber? https://www.ausmini.com/forums/viewtopic.php?f=2&t=7794 |
Page 1 of 1 |
| Author: | FatMaserati [ Fri Jun 03, 2005 9:31 pm ] |
| Post subject: | Dare me to get a 48 DCOE Weber? |
Didn't even know they made them! Thought 45 was the ultimate. EDIT: They make 50 and 55 as well, but I found an inlet manifold for a Mini that can take a 40, 45 or 48 DCOE Weber. EDIT 2: http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&category=72205&item=7976908435&rd=1&ssPageName=WD2V Who's up for a threesome!? 
|
|
| Author: | Lillee [ Fri Jun 03, 2005 9:42 pm ] |
| Post subject: | |
Gafmo has a 48... You probably don't need to run more than 38mm chokes on a mini which makes the 45 enough IMO... You start to lose inlet flow velocity which means losing torque. |
|
| Author: | drmini in aust [ Fri Jun 03, 2005 10:21 pm ] |
| Post subject: | |
Gafmo's is a Dellorto 48DHLA. Same (italian) horse, different colour.. A 48 is just a 45 with bigger throttle plates, it takes the same chokes as a 45. Yeah they work, but not as well in a Mini as a 45, according to Des Hammill's books.
|
|
| Author: | 9YaTaH [ Fri Jun 03, 2005 10:34 pm ] |
| Post subject: | Re: Dare me to get a 48 DCOE Weber? |
[quote="FatMaserati"]Didn't even know they made them! Thought 45 was the ultimate.quote] How about a Weber 58 DCOA3 carburettor.......... |
|
| Author: | Lillee [ Fri Jun 03, 2005 10:54 pm ] |
| Post subject: | |
Why not bolt a jet engine manifold onto it while you're at it! 
|
|
| Author: | willy [ Fri Jun 03, 2005 11:03 pm ] |
| Post subject: | |
I was yawning while i read your comment 68D, and i squirted saliva from my mouth from when i laughed. It felt like it came out from under my tounge, and there was lots of it. 
crap that sounds like one of Camel's posts now. Okker.... Cheesecake thats bad.
|
|
| Author: | gafmo [ Fri Jun 03, 2005 11:06 pm ] |
| Post subject: | |
Sorry its not just a 48 
It's a Bling 48 Delly Yep she will be chocked down, and to Pee you guys off more I got it for $100
For additionalinfo for some it came off an Escort
|
|
| Author: | 1310/71 [ Fri Jun 03, 2005 11:14 pm ] |
| Post subject: | |
gafmo wrote: Sorry its not just a 48
It's a Bling 48 Delly Yep she will be chocked down, and to Pee you guys off more I got it for $100 For additionalinfo for some it came off an Escort Didn't the Doc tell you it won't fit BEFORE you started to polish it? - he's a sick puppy!
|
|
| Author: | drmini in aust [ Fri Jun 03, 2005 11:23 pm ] |
| Post subject: | |
It'll fit, LOL... just won't go as hard as mine... 
|
|
| Author: | gafmo [ Fri Jun 03, 2005 11:27 pm ] |
| Post subject: | |
Bull.....its a 48 just chocked down to what we need  You know the rest
|
|
| Author: | TheMiniMan [ Sat Jun 04, 2005 9:41 am ] |
| Post subject: | |
yeah,,,but!!!,,,what if it were fitted to a fire breathng 1510cc race donk??? & yeah,,,i`ve got a Delly 48 too  But just to pee you off, i bought it with a heap of SUs & quite a few 45 webers in bits , all for $50 not Kidding
|
|
| Author: | Lillee [ Sat Jun 04, 2005 9:55 am ] |
| Post subject: | |
big willy wrote: I was yawning while i read your comment 68D, and i squirted saliva from my mouth from when i laughed.
It felt like it came out from under my tounge, and there was lots of it. crap that sounds like one of Camel's posts now. Okker.... Cheesecake thats bad. I was just getting in on the act  58 DCOA indeed! I dun care what size A series you have, it's too big!
Yeah miniman I was going to say that anything over 48 is too big for any mini, then I remembered that there have been up to 1600cc A series engines in the past.. beyond 1400cc is a mystery to me
|
|
| Author: | TheMiniMan [ Sat Jun 04, 2005 11:10 am ] |
| Post subject: | |
I`ve known of a 1620 before,,,don`t know where it is now tho & my dad was trying to make one with a double offset 3" bore,,,hee hee,,,now that`s a big mini donk no matter what stroke 48 is probly still too big for a 1600 really,,,but still a good wank value hey? we were looking for another 48 for Stew`s 1600cc X-flow, but i`ve bulit up a pair of 45s for him so they`ll do him for now, he`s sh!t scared of it as it is anyway, so no need for more poo in his pants with even more revs hey? i told him yesturday that he`ll be needing to buy himself a brown race suit hee hee,,,still laughing about it hee hee
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|