ausmini
https://www.ausmini.com/forums/

1275 or 1100
https://www.ausmini.com/forums/viewtopic.php?f=2&t=7801		 Page 1 of 2
Author:  BLACKRZ_667 [ Sat Jun 04, 2005 11:52 am ]
Post subject:  1275 or 1100
Hey guys
i was just wondering how much a 1275 would cost in aus?
and would it be better for me to buy a 1100 and fully working it like as much as i can?
thanks guys
Author:  Wolfman [ Sat Jun 04, 2005 12:14 pm ]
Post subject: 
It depends on the condition of the 1275 and what's been done to it, anywhere from $500 - $5000 , don't forget you also need front Disc brakes to fit a 1275.
Author:  Mick [ Sat Jun 04, 2005 2:21 pm ]
Post subject: 
You can always expand onna standard 1275, but you will reach a performance ceiling with an 1100.

But the simplicity of a 1100 is pretty hard to go past, or the song of a high revving 998....
Author:  willy [ Sat Jun 04, 2005 2:22 pm ]
Post subject: 
why don't you just go 998?
Author:  BLACKRZ_667 [ Sat Jun 04, 2005 5:34 pm ]
Post subject: 
i have a 998 but i just want more power
i have zorst extractors
what is a mod that i will notice the differance
i was thinking a 1275 with a super charger or something i dunno
Author:  poeee [ Sat Jun 04, 2005 6:46 pm ]
Post subject: 
If the bottom end of your 998 is still strong (not worn), then go a bit further with mods on your current engine.

Modify a 12G202 head (off an 1100). Big valves, ported, shaved, the usual. The 12G202 are a good easy head to find and aren't expensive. You may even have one on ya current engine.

Hot camshaft. Something along the lines of an RE13 would go great in a 998 with a hot head and the right carby and exhaust setup.

1.75" SU.

That would give more life to your 998, and I recon would beat any standard 1275. 8)
Author:  BLACKRZ_667 [ Sat Jun 04, 2005 7:03 pm ]
Post subject: 
how much would i be looking at top do all this like just partz??
thanks
Author:  aaron [ Sat Jun 04, 2005 7:40 pm ]
Post subject: 
Parts is spelt with an S not a Z

Cheers

Aaron
Author:  min13k [ Sat Jun 04, 2005 7:42 pm ]
Post subject: 
arron maybe you should change your name to anal ffs leave it alone
makka
Author:  aaron [ Sat Jun 04, 2005 7:53 pm ]
Post subject: 
Good one Makka.
Author:  Spaceboy [ Sat Jun 04, 2005 7:56 pm ]
Post subject: 
Keep the 998, they're bulletproof. AND you've already got one..and
they're a much sweeter engine than the 1100...

yeah if you've got extractors and zorst, work the head.. should cost about 500-600 bucks or sommit.
You'll get a big chunk of power there..
go the 202 head like poeee said.

make sure you have at least a 1& 1/2 inch su.

at the same time, put a fast road cam in there to liven things up

you might get around 60hp
and she'll pull real hard.

a stocko 1275 in decent nick will cost you say 2000 bucks or so and to be legal require disk brakes.
And dont forget that everything for 1275's will cost more.

if you want to turbo/supercharge, you really need an engine thats fresh, and preferably built to take it..
Author:  drmini in aust [ Sat Jun 04, 2005 8:48 pm ]
Post subject: 
I've had 850-998-1098-1220-1275-1310 & 1360.
No substitute for cubic inches, if you want performance.

I'd find a 1275 in bits, cheap, and do it up. Yeah, there are still a few about, keep your eyes open. I bought a crank here, a head there, etc. :wink:
My 1360 in the car now only cost me $1300 for a full reco, including rebore, crank grind, RE-13 cam & followers, bearings, pistons, etc etc.
Not including gearbox- I did that last year.
OK, so I put it all together which saved me a bundle. But it's pretty cheap. See how far $1300 goes on a ricer.... :?
Author:  Spaceboy [ Sat Jun 04, 2005 9:03 pm ]
Post subject: 
$1300 will get you some neons YEAH!
or a JUN BL.. :lol:
ooh ooh.. scissor doors!!

i cant even get my hands on a decent smallbore engine for cheap these days.. $750 for one thats been rebuilt a few years ago i was looking at..
i ended up buying a modified one for $1000, but the gearbox is pretty average. And thats like $1200-1500 to get it rebuilt.

you are looking at $2000 for a good 1275 not including removal of your smallbore and installation of the new donk..
that is unless you know someone...
you could probably get a very second hand one for 500, but its only useful as a paperweight unless you're a mechanic or sommit, because it will cost you 2-3 grand to get someone to rebuild it all..
Author:  -=MiniMafia=- [ Sat Jun 04, 2005 9:05 pm ]
Post subject: 
:shock: for the laaaaaaaaast time, buy the 1138!!!!! its a great motor!!! come and see for your self. its not a 1275, but u will like it :D
Author:  kazjim [ Sat Jun 04, 2005 10:21 pm ]
Post subject: 
I recently sold a 1275 for $500.... totally virgin....

They are still out there.... just gotta go scrounging......

Pesonally, I'd stick to the 998 or 1100.... its just so rewarding to kick these big-block boys arses at the Dyno days....ok, so I'm blown, but hey... its not THAT wild........

Good luck.
J
Page 1 of 2 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/