| ausmini https://www.ausmini.com/forums/ |
|
| electrical connectors (Like the ones on an original Loom) https://www.ausmini.com/forums/viewtopic.php?f=2&t=78104 |
Page 1 of 1 |
| Author: | kiwiinwgtn [ Sun Aug 19, 2012 6:07 pm ] |
| Post subject: | electrical connectors (Like the ones on an original Loom) |
Where does one get those clear rubber spade connectors like the original ones to the coil. I want to make it look original Ta Kiwiinwgtn |
|
| Author: | coopar [ Sun Aug 19, 2012 6:37 pm ] |
| Post subject: | |
Now thats going the extra mile |
|
| Author: | Convertible Mini [ Sun Aug 19, 2012 6:48 pm ] |
| Post subject: | insulators |
From an old Lucas wiring harness. Does not matter what English car they are out of. Japanese and Taiwanese made ones are not exactly the same. |
|
| Author: | michaelb [ Sun Aug 19, 2012 7:42 pm ] |
| Post subject: | |
Check out Google? There was a Vintage wiring loom company at Eastern Creek today, but sorry I didn't pick up one of their catelogues. |
|
| Author: | kiwiinwgtn [ Sun Aug 19, 2012 7:55 pm ] |
| Post subject: | |
I recently brought a Mini Moke from a friends estate. My friend was crazy on originality. So to honor him I will try and keep the car as original as possible. I have plenty of other cars to modify. Also the crimp on repco ones look !@#$ and fall off I also like the original look. Kiwiinwgtn |
|
| Author: | kiwiinwgtn [ Sun Aug 19, 2012 7:59 pm ] |
| Post subject: | |
Convertible Mini Its the ones that go to the coil on a Mini Clear / opaque female terminal connector (close is ok) Ta Kiwiinwgtn |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|