Valvemaster and flashlube have been discussed here....do a search...I think the concensus is that Flashlube is good....valvemaster is something else
| ausmini https://www.ausmini.com/forums/ |
|
| Valvemaster fluid https://www.ausmini.com/forums/viewtopic.php?f=2&t=7811 |
Page 1 of 1 |
| Author: | scotty [ Sat Jun 04, 2005 4:44 pm ] |
| Post subject: | Valvemaster fluid |
I was told by someone that Valvemaster fluid accually damages the valves after time. Is this true? Could somebody sudgest an alternative? |
|
| Author: | 9YaTaH [ Sat Jun 04, 2005 4:51 pm ] |
| Post subject: | search ausmini |
Valvemaster and flashlube have been discussed here....do a search...I think the concensus is that Flashlube is good....valvemaster is something else
|
|
| Author: | poeee [ Sat Jun 04, 2005 4:55 pm ] |
| Post subject: | |
Flashlube is the way to go. As 9y said, do a search, there is alot of info on lead replacement additives. |
|
| Author: | drmini in aust [ Sat Jun 04, 2005 5:28 pm ] |
| Post subject: | |
Flashlube works out cheaper. 1mL = 1L of fuel, so 1L does 1,000L and costs around $16. That's peanuts. Extra 1.6c/L. And it works. It won't crap your plugs etc up like Valvemaster does either. Available from Repco, AutoPro, AutoOne etc. 
ps. the cap on the 1L bottle is 7.5mL, so I use a capful for every 7 or 8L of fuel. |
|
| Author: | Wolfman [ Sat Jun 04, 2005 5:50 pm ] |
| Post subject: | |
While we're on the subject, after converting for unleaded is it still a good idea to use flashlube every now and then or is there no need at all? |
|
| Author: | 9YaTaH [ Sat Jun 04, 2005 5:53 pm ] |
| Post subject: | UCL |
its an upper cylinder lubricant etc....it should benefit just about any four cycle engine.... |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|