| ausmini https://www.ausmini.com/forums/ |
|
| suspension problem https://www.ausmini.com/forums/viewtopic.php?f=2&t=78124 |
Page 1 of 1 |
| Author: | LAZZA1964 [ Mon Aug 20, 2012 9:31 pm ] |
| Post subject: | suspension problem |
ok guys, a little help needed. trying to get suspension cones of trumpets :back cones no problem... front cones problem.. i have compressed cone till i cant turn it no more any tips as i still cannot remove the cone from the trumpet any ideas...  do i try to bash it now that its fully compressed i did not think it would be so difficult as the back ones were so easy.help...
|
|
| Author: | drmini in aust [ Mon Aug 20, 2012 10:04 pm ] |
| Post subject: | |
Take the top arm out. Saves a lot of hassle. |
|
| Author: | LAZZA1964 [ Mon Aug 20, 2012 10:17 pm ] |
| Post subject: | suspension problem |
ok doc thanks for youre swift response as usual..... there is nothing atttached to the trumpet its all on its own just cant seem to get them apart... |
|
| Author: | drmini in aust [ Mon Aug 20, 2012 10:52 pm ] |
| Post subject: | |
Spray WD40 round the lip of the trumpet and leave overnight. |
|
| Author: | 1275LS [ Tue Aug 21, 2012 12:21 am ] |
| Post subject: | Re: suspension problem |
LAZZA1964 wrote: ok doc thanks for youre swift response as usual..... there is nothing atttached to the trumpet its all on its own just cant seem to get them apart...
When I pulled my fronts out the hi los just wouldn't separate. I tried WD40, heating the cone and cutting the cone but to no avail. I bought new hi-los for the new cones and left the old ones sitting for another time when I have nothing better to do. |
|
| Author: | LAZZA1964 [ Tue Aug 21, 2012 8:56 pm ] |
| Post subject: | suspension problem |
ok guys managed to get them all seperated the last one of course was a pig to get off but all good now thanks to all who gave me advice 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|