| ausmini https://www.ausmini.com/forums/ |
|
| fuel pressure regulator https://www.ausmini.com/forums/viewtopic.php?f=2&t=78284 |
Page 1 of 1 |
| Author: | ricksmini [ Sun Sep 02, 2012 9:17 am ] |
| Post subject: | fuel pressure regulator |
hi all just wondering where everyone mounts there fuel pressure regulator |
|
| Author: | drmini in aust [ Sun Sep 02, 2012 2:44 pm ] |
| Post subject: | |
If I needed one it would be up high on the firewall. But why do you need one? (unless it's turbo and blow thru carb, you then would need a rising rate regulator). If it's an N/A car, with the right fuel pump pressure to suit the carby, a regulator is just something else to go wrong. Also some brands are notoriously inaccurate and a waste of time using. I hear Holley ones are OK. |
|
| Author: | ricksmini [ Sun Sep 02, 2012 6:08 pm ] |
| Post subject: | |
What fuel pump do you use doc |
|
| Author: | drmini in aust [ Sun Sep 02, 2012 6:47 pm ] |
| Post subject: | |
I use a Facet electronic (square one) I think it's about 3 to 4psi. Works fine with either a Weber, a Dellorto, or an SU. I bolt them to a Mini square centre exhaust mount, then bolt that to the subframe (drill 1 hole 8mm dia). This shuts the noise up. Note that wiring there was temporary (since weatherproofed). Like this- 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|