It's a 1976 Clubman S .I've never seen these brackets before.
It had this in it also
| ausmini https://www.ausmini.com/forums/ |
|
| What are these for ? https://www.ausmini.com/forums/viewtopic.php?f=2&t=78318 |
Page 1 of 2 |
| Author: | mr moke [ Tue Sep 04, 2012 6:38 pm ] |
| Post subject: | What are these for ? |
It's a 1976 Clubman S .I've never seen these brackets before.
It had this in it also
|
|
| Author: | Morris 1100 [ Tue Sep 04, 2012 7:06 pm ] |
| Post subject: | |
Looks like dual horns that may have gone with the option pack that included the lights, roof aerial, cassette player. |
|
| Author: | MINImal effort [ Tue Sep 04, 2012 7:06 pm ] |
| Post subject: | |
Horns... |
|
| Author: | d1ck0 [ Tue Sep 04, 2012 7:14 pm ] |
| Post subject: | |
MINImal effort wrote: Horns...
+1 Dicko. |
|
| Author: | Kennomini [ Tue Sep 04, 2012 7:23 pm ] |
| Post subject: | |
I was going to guess horn as well. But isn't that a Leyland mini SS?
See that on the left side of the cassette surround...pluss the driving lights  What else dose the SS's have to determine what they are?
|
|
| Author: | Morris 1100 [ Tue Sep 04, 2012 7:27 pm ] |
| Post subject: | |
Kennomini wrote: What else dose the SS's have to determine what they are?
Compliance plate. |
|
| Author: | d1ck0 [ Tue Sep 04, 2012 7:46 pm ] |
| Post subject: | |
Cloth seat inserts. But my 78 S had those too. Dicko. |
|
| Author: | mr moke [ Tue Sep 04, 2012 9:03 pm ] |
| Post subject: | |
Thanks guys here is a pic of the tag 
|
|
| Author: | John Smidt [ Tue Sep 04, 2012 9:04 pm ] |
| Post subject: | |
That is a stiffener Panel used when the lamps were fitted in behind the grille, A genuine Part |
|
| Author: | mr moke [ Tue Sep 04, 2012 9:19 pm ] |
| Post subject: | |
Thanks John. I'll remove them before i send it to it's resting place 
|
|
| Author: | Bubbacluby [ Tue Sep 04, 2012 9:20 pm ] |
| Post subject: | |
mr moke wrote: Thanks John. I'll remove them before i send it to it's resting place
That shell looks to be ok, Why are you destroying it? |
|
| Author: | mr moke [ Tue Sep 04, 2012 9:29 pm ] |
| Post subject: | |
there is rust around the roof L/H rear 1/4 is pretty rusty near the glass.And I want to cut the floor out of it for my GT 
|
|
| Author: | mr moke [ Tue Sep 04, 2012 9:33 pm ] |
| Post subject: | |
It also has a rear wiper motor  
|
|
| Author: | Kennomini [ Tue Sep 04, 2012 9:47 pm ] |
| Post subject: | |
No offence mate but I'm shocked your planing on cutting that mini up  I have shells ten times worse and I plan to rebuild them.
Seriously, how bad is the GT floor and why not use new replacement panels? If you were near by I'd offer you a spare floor I have from a crashed mini and try to get that nice straight shell for myself. For an example I'm currently restoring this; 
And I was surprised when the guy I brought it off told me he was planing on cutting it up for panels,. New panels aren't incredibly cheap but where can you buy a new classic mini? P.S. I just had a quick look on mini sport Aus and the replacement panels are around $550, both fronts and rears and sills. I'd have to say that mini is worth more than that .
|
|
| Author: | mr moke [ Tue Sep 04, 2012 10:25 pm ] |
| Post subject: | |
I agree if someone wants to give me new floor panels I'll give them the clubby S with out the mags (there not mine ) . Here is the floor of my GT. 
|
|
| Page 1 of 2 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|