ausmini
https://www.ausmini.com/forums/

Wheel Allignment - Brisbane southside
https://www.ausmini.com/forums/viewtopic.php?f=2&t=78342		 Page 1 of 1
Author:  TK [ Thu Sep 06, 2012 8:20 am ]
Post subject:  Wheel Allignment - Brisbane southside
I need a wheel allignment this Saturday. Usually I go to Accurate Suspension but they aren't open Saturdays.
Any ideas?

FOUND. Finally found a place that does 10 inch wheels. Bridgestone Coopers Plains. :)
Author:  brett [ Thu Sep 06, 2012 12:30 pm ]
Post subject: 
So you can drive it to muster TK?? :D
Author:  VicMini13 [ Thu Sep 06, 2012 2:57 pm ]
Post subject: 
I've never had trouble taking a Mini to any wheel alignment centre.

Some may not have the specs for a Mini though so I just take a copy of the Specs page from my manual with me just in case to show what it should be set up at
Author:  drmini in aust [ Thu Sep 06, 2012 3:10 pm ]
Post subject: 
A lot of wheel aligners can no longer do 10" wheels. They upgraded their systems so they can do stupid 22" wheels and bigger, and the laser align clamp thingys won't fit on a 10" (or some even a 12") rim.
Author:  TK [ Thu Sep 06, 2012 7:50 pm ]
Post subject: 
"So you can drive it to muster TK??"
Maybe :)
I'm getting around to 'fixing' a few things on Slidey as well as adding 4 piston callipers with cross drill rotors.
Back to the allignment. I rang a heap of tyre mobs and several laughed when I said 10 inch wheels. Bob Jane said they'd have a crack at it, he didn't laugh when I said 'well I'll have a crack at paying you for it.'
Author:  minimy [ Thu Sep 06, 2012 8:20 pm ]
Post subject: 
bob jane ipswich,can do it,always got mine done there.
Author:  tomtom [ Thu Sep 06, 2012 10:08 pm ]
Post subject: 
TK wrote:
"So you can drive it to muster TK??"
Maybe :)
I'm getting around to 'fixing' a few things on Slidey as well as adding 4 piston callipers with cross drill rotors.
Back to the allignment. I rang a heap of tyre mobs and several laughed when I said 10 inch wheels. Bob Jane said they'd have a crack at it, he didn't laugh when I said 'well I'll have a crack at paying you for it.'


If they can't - try Tyres & More at Coopers Plains. I know the boss there and he got me some good A008's so I'd hope he'd be able to align them. Worth a phone call.
Author:  TheMiniMan [ Thu Sep 06, 2012 11:20 pm ]
Post subject: 
we do minis Ty , but i do them down at Taylor st & i can`t do weekends i`m sorry, the shed is packed full of cars being parked in storage from all the panel beaters in the area. it`s not my shed & it`s not my call sorry Ty
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/