ausmini :: View topic - 1967-1969 Interior

Dennis Maher wrote:

Hey John,
Do you have any Cooper S boot board material and what materials (seat fabric etc) do you have in stock??

Dennis

Hi Dennis
I Have sold a lot of the Boot Lid Linner Board to a Guy In In The UK
but there is still a fair amount avail
Re Trim material I have a roll of Mk2 Cooper S material in Green
A Roll of the early Moke seat Material Black Waterproof
And a few rolls of various colour vynals to suit the Mini Clubman etc
I do not have any of the fabrics left I am sorry to say
There are still odd new old stock original seat covers avail

Author:	brett [ Tue Sep 11, 2012 2:35 pm ]
Post subject:	1967-1969 Interior
Hi Guys, Chasing an original set of Cooper S or Deluxe trim in green... Happy to part with the $$$ or perhaps swap it ( Depending on condition) with a brand new Aussie spec Newton commercial trim ( that has the wrong grain) I know I have placed it in wanted, but not everyone views it there... Cheers Brett

Author:	phillb [ Tue Sep 11, 2012 3:40 pm ]
Post subject:
John Smidt wrote: Dennis Maher wrote: Hey John, Do you have any Cooper S boot board material and what materials (seat fabric etc) do you have in stock?? Dennis Hi Dennis I Have sold a lot of the Boot Lid Linner Board to a Guy In In The UK but there is still a fair amount avail Re Trim material I have a roll of Mk2 Cooper S material in Green A Roll of the early Moke seat Material Black Waterproof And a few rolls of various colour vynals to suit the Mini Clubman etc I do not have any of the fabrics left I am sorry to say There are still odd new old stock original seat covers avail Contact John at MiniKing. Sounds like he had a roll of new old stock vinyl in green.

Author:	Dennis Maher [ Tue Sep 11, 2012 7:55 pm ]
Post subject:	Trim Material
Had a look at the material, John has undersold it a bit. It is still on the rolls (he has other colours as well, a nice Palamino). John also uses a trimmer who has all of the correct patterns. He did Mark's (Slacko's) interior - it is really good. John would ship it for you if you are interested Dennis

Author:	brett [ Tue Sep 11, 2012 8:07 pm ]
Post subject:
It's mk2 trim

Author:	phillb [ Tue Sep 11, 2012 8:34 pm ]
Post subject:
brett wrote: It's mk2 trim If you are talking about getting the correct grain in the vinyl I think It was all the same vinyl Mk 1 or 2. (happy to be corrected I'm no Mk2 expert) In fact if you look closely at an original vinyl dash in a cooper S it is the same vinyl as the seats. (see pic below) Manufactured by Nylex Aust I think so thats why any English vinyls will differ.

ausmini https://www.ausmini.com/forums/

1967-1969 Interior https://www.ausmini.com/forums/viewtopic.php?f=2&t=78421	Page 1 of 1

Page 1 of 1	All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/