ausmini https://www.ausmini.com/forums/ |
|
Mx5 seats https://www.ausmini.com/forums/viewtopic.php?f=2&t=78577 |
Page 1 of 1 |
Author: | r32 [ Sun Sep 23, 2012 8:55 am ] |
Post subject: | Mx5 seats |
Has anyone fitted them,or can someone post some pictures up with them in a mini . Thanks . |
Author: | arjay [ Sun Sep 23, 2012 9:34 am ] |
Post subject: | |
![]() ![]() Quite a few people in the UK have done this. Try and get the Jap version seats coz they have speakers in the head rest, if you didnt know this already. |
Author: | poeee [ Sun Sep 23, 2012 10:31 am ] |
Post subject: | |
Do these flip forward? |
Author: | r32 [ Sun Sep 23, 2012 11:23 am ] |
Post subject: | |
I don't know,do they flip forwards so that you can gain access to back seat? Good point. |
Author: | frednutz&co [ Sun Sep 23, 2012 11:25 am ] |
Post subject: | |
fitted honda civic seats to my van is good ![]() |
Author: | Harley [ Sun Sep 23, 2012 11:45 am ] |
Post subject: | |
That's nice Fred, but we're talking about mx5 seats. I think they might flip forward, some cars had storage space behind the seats. |
Author: | frednutz&co [ Sun Sep 23, 2012 1:28 pm ] |
Post subject: | |
mine go both ways ![]() ![]() priced mx5 s but at $500_$700 a set ![]() the Honda cost $100.00 ![]() |
Author: | AWOODY [ Sun Sep 23, 2012 5:14 pm ] |
Post subject: | |
they look even better in my MX5. |
Author: | Mokesta [ Sun Sep 23, 2012 8:19 pm ] |
Post subject: | |
The ones above with separate head rests are very early Jap spec cars. The tombstone style are common from the NA model. They do flip forward but not flip-and-slide like some from 2 door cars. Don't get seats from the NC (current) series as they are too wide. If you are in Brisbane go to MX5 Plus in Zillmere. Down south MX5 Mania. M |
Author: | Mike Montgomery [ Sun Sep 23, 2012 9:22 pm ] |
Post subject: | |
Mine have speakers built into the head rests ![]() |
Author: | r32 [ Sun Sep 23, 2012 9:42 pm ] |
Post subject: | |
Thanks guys for the I formation. |
Page 1 of 1 | All times are UTC + 10 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |