| ausmini https://www.ausmini.com/forums/ |
|
| wood and picket arches https://www.ausmini.com/forums/viewtopic.php?f=2&t=78630 |
Page 1 of 1 |
| Author: | ricksmini [ Wed Sep 26, 2012 9:10 pm ] |
| Post subject: | wood and picket arches |
hi all what size wheels fit best and look good under wood and picket wheel arches? |
|
| Author: | Harley [ Wed Sep 26, 2012 9:11 pm ] |
| Post subject: | |
Everything fits under them. Take your pick except for 13x7s. |
|
| Author: | ricksmini [ Wed Sep 26, 2012 9:14 pm ] |
| Post subject: | |
so any 13x6 any offset |
|
| Author: | Harley [ Wed Sep 26, 2012 9:22 pm ] |
| Post subject: | |
Most 13 x 6s do, some don't. What sort of wheels you thinking of specifically? |
|
| Author: | ricksmini [ Wed Sep 26, 2012 9:23 pm ] |
| Post subject: | |
like minilites id like to go 13 inch but i dont know what offset and how wide photos would be good |
|
| Author: | ricksmini [ Wed Sep 26, 2012 9:24 pm ] |
| Post subject: | |
or ultralites |
|
| Author: | Harley [ Wed Sep 26, 2012 9:37 pm ] |
| Post subject: | |
Performance 13x6s come in 23mm positive, they're about the limit. Ultralites are 10mm positive, can't comment on them. Seen it done, but the car might have had drums. Minilites go out to 28mm positive, you'd be fine there, but not sure what the normal offset they do for minis is. |
|
| Author: | ricksmini [ Wed Sep 26, 2012 9:43 pm ] |
| Post subject: | |
ohk im running discs on the front |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|