While looking over what I need to replace on my mini I came across this deteriorated rubber. I think it is the control arm bump stop but there isn't much left of it to ID, am I on the right track? (the other side is worse...)
| ausmini https://www.ausmini.com/forums/ |
|
| Part ID https://www.ausmini.com/forums/viewtopic.php?f=2&t=78678 |
Page 1 of 1 |
| Author: | womble99 [ Mon Oct 01, 2012 3:03 pm ] |
| Post subject: | Part ID |
While looking over what I need to replace on my mini I came across this deteriorated rubber. I think it is the control arm bump stop but there isn't much left of it to ID, am I on the right track? (the other side is worse...)
|
|
| Author: | drmini in aust [ Mon Oct 01, 2012 3:05 pm ] |
| Post subject: | |
It is a top arm rebound rubber. Available from Mini King, Karcraft etc. Don't expect them to last forever, the grease rots the (chinese) rubber. 
2A4267. |
|
| Author: | womble99 [ Mon Oct 01, 2012 3:16 pm ] |
| Post subject: | |
drmini in aust wrote: It is a top arm rebound rubber. Available from Mini King, Karcraft etc. Don't expect them to last forever, the grease rots the (chinese) rubber.
2A4267. Cheers, I was looking through my circa 1998 Mini Kingdom catalogue  and without having a piece that even resembles a rebound rubber it was my best guess.
Another part added to the list. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|