| ausmini https://www.ausmini.com/forums/ |
|
| whats the thickness of a unsed clutch plate https://www.ausmini.com/forums/viewtopic.php?f=2&t=78833 |
Page 1 of 1 |
| Author: | kiwiinwgtn [ Sun Oct 14, 2012 9:08 pm ] |
| Post subject: | whats the thickness of a unsed clutch plate |
As per the title any one got one handy.. Mines 7.15mm (used) and old one I fund in a pile of bits is 8.34mm nothing in any of my books. TA B |
|
| Author: | drmini in aust [ Sun Oct 14, 2012 9:15 pm ] |
| Post subject: | |
When you squeeze them with your fingers so the springy thingys inside are flat they measure about 7.5mm when new, I think. Can double check one in the morning... |
|
| Author: | mini_mad_matt [ Thu Oct 18, 2012 6:18 pm ] |
| Post subject: | |
I forgot to reply to this earlier. I measured 2 new clutch plates i have. The first is a solid button clutch, which measures 7.25mm, So that has no springs between the plates The second is an ap racing plate (normal type), which measured 7.4mm |
|
| Author: | kiwiinwgtn [ Thu Oct 18, 2012 7:07 pm ] |
| Post subject: | |
Thanks I brought a new clutch kit and it measured 7.94mm uncompressed so they seem to vary in thickness. The one I took of was 7.15mm compressed Ta B |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|