Can anybody help me with the width of the spacer in the swivel hub
Between the inside Bearing and the inside Grease seal
It would appear I now have to make 1 after I have lost 1 of mine.
Cheers Jim
| ausmini https://www.ausmini.com/forums/ |
|
| Front Disc Seal spacer Width https://www.ausmini.com/forums/viewtopic.php?f=2&t=78901 |
Page 1 of 1 |
| Author: | Klaery [ Sun Oct 21, 2012 3:31 pm ] |
| Post subject: | Front Disc Seal spacer Width |
Can anybody help me with the width of the spacer in the swivel hub Between the inside Bearing and the inside Grease seal It would appear I now have to make 1 after I have lost 1 of mine. Cheers Jim
|
|
| Author: | drmini in aust [ Sun Oct 21, 2012 4:57 pm ] |
| Post subject: | |
The spacer width for drum brake hubs (ball bearings) is 0.094" (2.38mm) The one for disc hubs (Timken bearings) is 0.229" (5.81mm) thick If fitting Timkens into a drum brake hub you should fit the wider spacer, or the seal will hit the bearing inner cone. |
|
| Author: | Klaery [ Sun Oct 21, 2012 5:15 pm ] |
| Post subject: | |
Thanks Doc Back to the shed for me.
Cheers |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|