ausmini
https://www.ausmini.com/forums/

Rear Adjustable Camber Brackets
https://www.ausmini.com/forums/viewtopic.php?f=2&t=79007		 Page 1 of 1
Author:  1018cc [ Mon Oct 29, 2012 11:10 pm ]
Post subject:  Rear Adjustable Camber Brackets
Hey everyone,

I'm struggling getting the last bolt in of my new rear adjustable camber brackets. I can't seem to get the arm down far enough to get the top bolt in.

Is there a trick to it? Do I need to deflate the hydro? (I have a pump so I don't mind letting it down).

This seems like a common mod for minis and I have no idea how people get past this point!

Any suggestions would be appreciated.

Thanks, Nick
Author:  Convertible Mini [ Tue Oct 30, 2012 4:08 am ]
Post subject:  Castor brackets.
I presume you are talking about the rears. Sometimes you might have to elongate the holes to make it easier, otherwise you will damage the thread and that will be a problem..
Author:  TK [ Tue Oct 30, 2012 12:43 pm ]
Post subject: 
Nick, I did mine a couple of weeks ago. Luckily dad helped out he was able move the arm using a lever, to get it in just the right place for me to put the bolt in. Two man job made it easier.
EDIT: No I didn't let the hydro down either.
Author:  simon k [ Tue Oct 30, 2012 2:16 pm ]
Post subject: 
remove the other bolts and check that the holes do actually line up properly

then use a pry bar between the arm and the subframe
Author:  TheMiniMan [ Tue Oct 30, 2012 4:24 pm ]
Post subject: 
yeah quite often those brackets don`t have the holes in the right places & need a bit of a mod

& yes also you`ll need a bit of a lever to get it all to line up
Author:  TheMiniMan [ Tue Oct 30, 2012 4:24 pm ]
Post subject: 
oops, double de-bug post
Author:  TheMiniMan [ Tue Oct 30, 2012 4:24 pm ]
Post subject: 
oops trippple de-bug post
Author:  woodwormm [ Tue Oct 30, 2012 7:42 pm ]
Post subject: 
I hope that's a finger/brain stutter Matt, not a palpitation! :P
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/