Hey guys I have had a problem lately of noise similar to that of front cv knocking whilst driving.
Initially it was purely around corners now is in a straight line and substantially worse.
I figured yep it was cvs until I took the wheels off.. What I have found is my disc rotor on the right side has heaps of play back and forth when I grab it a move it in and out.
Here's two pics first of bad side then good side I noticed there is a big difference in where the outer cone washer sitsin the hub and next to the large nut btwn the two sides not to mention the gap u can see.... I'm going to try tighten the bad side up but I'm thinking something is rooted.
Thanks doc looks like I'll have to send her in. Get it done properly was going to try myself but might pay to be on the safe side.