| ausmini https://www.ausmini.com/forums/ |
|
| Cams for 1310 & 1380 https://www.ausmini.com/forums/viewtopic.php?f=2&t=79527 |
Page 1 of 1 |
| Author: | 1380 yellow devil [ Wed Dec 12, 2012 10:22 pm ] |
| Post subject: | Cams for 1310 & 1380 |
I am wondering what cams are suitable for a 1310 & 1380 with mild head work and running 1.75 HIF. I am sure there are some better cams out now. I currently have a 30/70 cam in my 1380. |
|
| Author: | 1380 yellow devil [ Sun Dec 16, 2012 9:46 pm ] |
| Post subject: | |
Ok I have been looking at the swift tune sw7 for a 1330 and the sw10 for my 1380. Anyone had any experience with these cams and what sort of difference will I get over the Ivan Tighe reground 30/70 that I have now. |
|
| Author: | drmini in aust [ Mon Dec 17, 2012 8:23 am ] |
| Post subject: | |
These Swiftune cams have a rep for wearing out fast, they are too pointy on the lobe. More so if you run 1.5 rockers with them. I had the same problem with a Camtech 619 (VP3) with 1.5s, it did take 45,000 miles to cark it. I now run GR's cams, an RE13 in the 1412 stroker and RE282 (sprint cam) in the 1360. Both with 1.5 rockers. They have a nice big nose radius. After 11,000 miles the 282 cam still has full lift on all lobes. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|