Ausmini
It is currently Tue Aug 05, 2025 3:58 pm

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours




Post new topic Reply to topic  Page 1 of 2
  [ 16 posts ]  Go to page 1, 2  Next
  Print view Previous topic | Next topic 
Author Message
Minute
 Post subject: gearbox numbers
PostPosted: Sat Feb 09, 2013 4:20 pm 
Offline
998cc
998cc
User avatar

Joined: Mon Feb 20, 2006 2:32 am
Posts: 610
Location: Parmelia, WA
can anyone tell me what these gearboxes are? 22g1128
22g1832
and what diff should be in them?

thanks.

_________________
- '74 Clubman Ute project

Image
Top
 Profile  
 
Monaco
 Post subject:
PostPosted: Sat Feb 09, 2013 4:30 pm 
Offline
998cc
998cc

Joined: Mon Jun 18, 2007 9:00 pm
Posts: 1127
Location: Down South
22G1128 is a remote change 4 synchro, 3.44 diff
22G1832 is a rod change 4 synchro 3.44 diff
Top
 Profile  
 
John Sneddon
 Post subject: Gearboxes
PostPosted: Sat Feb 09, 2013 4:33 pm 
Offline
848cc
848cc

Joined: Sat Aug 09, 2008 5:30 pm
Posts: 479
Location: Newcastle
22G1128 - 4 synchro remote change - diff ratio 3.44 for standard vehicles or 3.65 for Clubman GT
22G1832 - 4 synchro rod change - diff ratio 3.44

_________________
John Sneddon
0408 431 807
1963 Morris Cooper
1965 Morris 850
1968 Morris Cooper S
Top
 Profile  
 
TK
 Post subject:
PostPosted: Sat Feb 09, 2013 4:36 pm 
Offline
1275cc
1275cc

Joined: Wed Jan 19, 2005 1:52 pm
Posts: 2582
Location: Brisbane
"22G1128 - 4 synchro remote change - diff ratio 3.44 for standard vehicles or 3.65 for Clubman GT"

22G1128 pretty sure didn't come out in a Mini K/early Clubman with a 3.44 diff ;)
Top
 Profile  
 
Minute
 Post subject:
PostPosted: Sat Feb 09, 2013 4:38 pm 
Offline
998cc
998cc
User avatar

Joined: Mon Feb 20, 2006 2:32 am
Posts: 610
Location: Parmelia, WA
is there any combination other than 18/62 that makes a 3.44diff? i need a replacement 3.44 diff with a 62 tooth crownwheel to replace my broken one

_________________
- '74 Clubman Ute project

Image
Top
 Profile  
 
Monaco
 Post subject:
PostPosted: Sat Feb 09, 2013 4:41 pm 
Offline
998cc
998cc

Joined: Mon Jun 18, 2007 9:00 pm
Posts: 1127
Location: Down South
TK wrote:
"22G1128 - 4 synchro remote change - diff ratio 3.44 for standard vehicles or 3.65 for Clubman GT"

22G1128 pretty sure didn't come out in a Mini K/early Clubman with a 3.44 diff ;)


Yeah, some early cars had a 3.76 diff, but most are 3.44.
Top
 Profile  
 
TK
 Post subject:
PostPosted: Sat Feb 09, 2013 4:44 pm 
Offline
1275cc
1275cc

Joined: Wed Jan 19, 2005 1:52 pm
Posts: 2582
Location: Brisbane
OK

http://www.ausmini.com/forums/viewtopic ... 8e58c13476
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sat Feb 09, 2013 5:40 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
Monaco wrote:
TK wrote:
"22G1128 - 4 synchro remote change - diff ratio 3.44 for standard vehicles or 3.65 for Clubman GT"

22G1128 pretty sure didn't come out in a Mini K/early Clubman with a 3.44 diff ;)


Yeah, some early cars had a 3.76 diff, but most are 3.44.


I beg to differ, my Mini K parts book lists 3.765 and 3.647 ratios, NOT 3.44.
The only 22G1128 boxes I've found to have a 3.44 in stock were Mk2 S and GT.
My car has a box I took out of a GT, its diff ratio was 3.44 until I changed it.

The UK 1275GT (with way less power than ours) had a 3.647, I'm not aware the Oz GT ever did.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Minute
 Post subject:
PostPosted: Sat Feb 09, 2013 8:43 pm 
Offline
998cc
998cc
User avatar

Joined: Mon Feb 20, 2006 2:32 am
Posts: 610
Location: Parmelia, WA
next question. is there any way of telling what mini these boxes came from?

_________________
- '74 Clubman Ute project

Image
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sat Feb 09, 2013 9:22 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
Minute wrote:
next question. is there any way of telling what mini these boxes came from?

re 22G1128 boxes-
IMO- "If the box has rubber U/Js and is remote shift it is either off a Mini K or an early 1098 Clubby.
If it has rubber U/Js and a puddin'stirrer shift, it is out of a van, or a Moke.
If it has Hardy Spicer steel U/Js and the cluster gear has 22G1040 stamped on it, it's a Cooper S or Clubby GT".

However, 40 years on as it is, things get swapped about, anything is possible. :lol:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Minute
 Post subject:
PostPosted: Sat Feb 09, 2013 9:42 pm 
Offline
998cc
998cc
User avatar

Joined: Mon Feb 20, 2006 2:32 am
Posts: 610
Location: Parmelia, WA
thanks doc

_________________
- '74 Clubman Ute project

Image
Top
 Profile  
 
John Smidt
 Post subject:
PostPosted: Sat Feb 09, 2013 11:42 pm 
Offline
The Mini King
User avatar

Joined: Mon May 21, 2007 7:20 pm
Posts: 1338
Location: Windsor, NSW
If it has Hardy Spicer steel U/Js and the cluster gear has 22G927 stamped on it, it's a Moke".
But as The Doc says This may have been changed over the Years

_________________
" A Hundred Years From Now It will not Matter what my Bank Acount Was,
The Sort Of House I Lived in, Or The Kind Of Car I drove ... But The World May Be A Better Place
Because I was Once Important In The Life Of A Child"
Top
 Profile  
 
Scclubman
 Post subject:
PostPosted: Sun Feb 10, 2013 4:37 am 
Offline
848cc
848cc
User avatar

Joined: Tue Nov 13, 2012 8:24 pm
Posts: 12
Location: South-Africa Pretoria
What must I look for to get a higher ratio say 4.11:1 :?
Top
 Profile  
 
drmini in aust
 Post subject:
PostPosted: Sun Feb 10, 2013 8:45 am 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39764
Location: near Baulkham Hills, NSW
Scclubman wrote:
What must I look for to get a higher ratio say 4.11:1 :?

The 4.13 and 4.26 were used here in bigwheel Mokes and some Morris 1100s.
I have a good 4.26 CW/P for sale if you are interested...

[edit] You can fit this ratio to any box.

see http://www.ausmini.com/forums/viewtopic ... highlight=

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:
Top
 Profile  
 
Scclubman
 Post subject:
PostPosted: Sun Feb 10, 2013 10:37 pm 
Offline
848cc
848cc
User avatar

Joined: Tue Nov 13, 2012 8:24 pm
Posts: 12
Location: South-Africa Pretoria
Thanks Dr. it will be a bit difficult to get it to South Africa but thanks for the info
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 2
  [ 16 posts ]  Go to page 1, 2  Next

Board index » Mini Chat » Mini Chat

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 88 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.