ausmini
https://www.ausmini.com/forums/

Anyone know of this car?
https://www.ausmini.com/forums/viewtopic.php?f=2&t=7966		 Page 1 of 1
Author:  GT1360 [ Fri Jun 10, 2005 8:48 am ]
Post subject:  Anyone know of this car?
Anyone know anything about this car?

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... 14405&rd=1

* starts thinking * :twisted:
Author:  mini_van_1970 [ Fri Jun 10, 2005 8:54 am ]
Post subject: 
That doesn't look to bad ..... that is my dream mini but with out that crap (paint and numbers) on it ..... does anyone know whether it is like a mk3 or is it just a mk2 with no quarter window and the rover grill

And in answer to your question no I don't know anything bout this car
Author:  J_A_M [ Fri Jun 10, 2005 9:26 am ]
Post subject: 
mini_van_1970 wrote:
That doesn't look to bad ..... that is my dream mini but with out that crap (paint and numbers) on it ..... does anyone know whether it is like a mk3 or is it just a mk2 with no quarter window and the rover grill

And in answer to your question no I don't know anything bout this car


it's got a K bonnet.

Windows would have been removed for racing. Prolly had perspex in 850 doors.
Author:  simon k [ Fri Jun 10, 2005 9:40 am ]
Post subject: 
J_A_M wrote:
mini_van_1970 wrote:
That doesn't look to bad ..... that is my dream mini but with out that crap (paint and numbers) on it ..... does anyone know whether it is like a mk3 or is it just a mk2 with no quarter window and the rover grill

And in answer to your question no I don't know anything bout this car


it's got a K bonnet.

Windows would have been removed for racing. Prolly had perspex in 850 doors.


nah, I reckon that's a pommy Mk2 badge like one Kev's car, need a close-up though. It isn't an aussie bonnet, because they can't mount the top rail for that grille surround - they have a flat piece spot welded to the underside of the bonnet lip - I guess it could have been made up, but the description says it's from NZ, so would be a pommy car

It has external door hinges, so is a pommy Mk2
Author:  drmini in aust [ Fri Jun 10, 2005 3:38 pm ]
Post subject: 
It's a UK made shell, check the height of rear side windows- they go right up to the gutter.
Simon, isn't a K front badge the same as UK Morris Mk2 one?? There was a thread a week or 2 back..
Author:  Mike [ Fri Jun 10, 2005 8:37 pm ]
Post subject: 
skssgn wrote:
J_A_M wrote:
mini_van_1970 wrote:
That doesn't look to bad ..... that is my dream mini but with out that crap (paint and numbers) on it ..... does anyone know whether it is like a mk3 or is it just a mk2 with no quarter window and the rover grill

And in answer to your question no I don't know anything bout this car


it's got a K bonnet.

Windows would have been removed for racing. Prolly had perspex in 850 doors.


nah, I reckon that's a pommy Mk2 badge like one Kev's car, need a close-up though. It isn't an aussie bonnet, because they can't mount the top rail for that grille surround - they have a flat piece spot welded to the underside of the bonnet lip - I guess it could have been made up, but the description says it's from NZ, so would be a pommy car

It has external door hinges, so is a pommy Mk2


Not so, My mini K bodyshell has this Mk2 Uk grille - the PO just screwed it in I think.
Author:  min13k [ Fri Jun 10, 2005 9:08 pm ]
Post subject: 
this car come in about 3 years ago with the now owners they come across the ditch for a better life they are freinds of a freind it is a uk built mk3 that was sold in unzed
makka
Author:  ClubmanGT [ Sat Jun 11, 2005 4:21 am ]
Post subject: 
Makka, not Mk 3, it's a Mk 2. They were made in 68-69 and had external door hinges, the new grill shape and the larger rectangular tail lights. The Mk 3 began 69-70 and were the the first pommie cars with wind up windows and internal door hinges. Mk 2's are like rocking horse sh1t here now.
Author:  min13k [ Sat Jun 11, 2005 3:19 pm ]
Post subject: 
ok so i had the mk wrong but the rest is correct lol
makka
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/