doogie wrote:
1-5/16"
Doogie
Doogie
Fixed for ya, some Imperially challenged folks may have thought it was 15/16" (I've seen it happen).
A 33mm (even 34mm) also fits OK, better than using a *^%&( chisel and a BFH...
| ausmini https://www.ausmini.com/forums/ |
|
| steering wheel nut https://www.ausmini.com/forums/viewtopic.php?f=2&t=79704 |
Page 1 of 1 |
| Author: | LAZZA1964 [ Sat Dec 29, 2012 7:48 am ] |
| Post subject: | steering wheel nut |
can someone please help ..i need to know the size of the steering wheel centre nut the one that holds the steering wheel to the steering column ,under the horn cap... |
|
| Author: | doogie [ Sat Dec 29, 2012 8:10 am ] |
| Post subject: | |
1 5/16 Doogie |
|
| Author: | Timbo [ Sat Dec 29, 2012 8:13 am ] |
| Post subject: | |
If you don't have a socket that fits just bash it off with a cold chisel and don't worry about doing it back up properly - that seems to be what every previous owner of my various Minis has done. Tim |
|
| Author: | drmini in aust [ Sat Dec 29, 2012 8:18 am ] |
| Post subject: | |
doogie wrote: 1-5/16"
Doogie Fixed for ya, some Imperially challenged folks may have thought it was 15/16" (I've seen it happen). A 33mm (even 34mm) also fits OK, better than using a *^%&( chisel and a BFH...
|
|
| Author: | LAZZA1964 [ Sat Dec 29, 2012 1:51 pm ] |
| Post subject: | steering wheel nut |
thank you very much gentlemen much appreciated..... |
|
| Author: | Maxi23 [ Sat Dec 29, 2012 2:50 pm ] |
| Post subject: | |
Timbo wrote: If you don't have a socket that fits just bash it off with a cold chisel and don't worry about doing it back up properly - that seems to be what every previous owner of my various Minis has done.
Tim
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|