The Mini King John Smidt had NOS of the rivet and plastic spacer that goes between the 2 halves of the top hinge where you have the bolt and 6 nuts.
I had a bolt and 2 nuts for a long time before I found the rivets and spacer at Mini King.
RonR
| ausmini https://www.ausmini.com/forums/ |
|
| Front quarter window top hinge https://www.ausmini.com/forums/viewtopic.php?f=2&t=79898 |
Page 1 of 1 |
| Author: | Lillee [ Thu Jan 10, 2013 2:58 pm ] |
| Post subject: | Front quarter window top hinge |
Hello, Can someone help me out with a photo of what your Mini K/Deluxe front quarter panel window (the one that swings open on wind up window cars) looks like at the top of the window? I have a strange thing that sticks out of the body at held together with a bolt that has 6 nuts on it. I want to get it back to original because it whistles at speed (been bothering me for 10 years, about time I sorted it out!). The final straw was the other day it took a chunk out of my arm so it has to go... Thanks In Advance! |
|
| Author: | Lillee [ Thu Jan 10, 2013 3:32 pm ] |
| Post subject: | |
Or you can just explain what the hinge is supposed to look like or point me to parts what I need to buy to get it back to stock... thanks! |
|
| Author: | miniron [ Thu Jan 10, 2013 4:30 pm ] |
| Post subject: | |
|
The Mini King John Smidt had NOS of the rivet and plastic spacer that goes between the 2 halves of the top hinge where you have the bolt and 6 nuts. I had a bolt and 2 nuts for a long time before I found the rivets and spacer at Mini King. RonR |
|
| Author: | Lillee [ Thu Jan 10, 2013 6:17 pm ] |
| Post subject: | |
Rivet and spacer! I knew it wasn't bolt and 6 nuts!! Many thanks |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|