hey doc , so would i have to change this needle
and if so which one am i after
| ausmini https://www.ausmini.com/forums/ |
|
| carby q ,2 https://www.ausmini.com/forums/viewtopic.php?f=2&t=79947 |
Page 1 of 1 |
| Author: | LAZZA1964 [ Sun Jan 13, 2013 7:48 pm ] |
| Post subject: | carby q ,2 |
hey guys , would a leyland mini 1 1/4 carby set up fit an 850 morris mini as i have a chance at one in good working order with all parts for extremly good price or am better of looking for a good one of a morris mini |
|
| Author: | Kennomini [ Sun Jan 13, 2013 7:55 pm ] |
| Post subject: | |
Are you after factory original for the 850 or just a usable replacement? And to answer your question as far as I know it will bolt straight on. |
|
| Author: | drmini in aust [ Sun Jan 13, 2013 8:48 pm ] |
| Post subject: | |
Same carby, only the needle would be different. |
|
| Author: | LAZZA1964 [ Mon Jan 14, 2013 7:50 pm ] |
| Post subject: | carby q 2 |
hey doc , so would i have to change this needle and if so which one am i after
|
|
| Author: | drmini in aust [ Mon Jan 14, 2013 8:08 pm ] |
| Post subject: | Re: carby q 2 |
LAZZA1964 wrote: hey doc , so would i have to change this needle
and if so which one am i afterStandard 850 needle was EB, rich was M, lean was GG, use with a red damper spring. According to my Leyland Black Book. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|