Ausmini
It is currently Fri Jul 18, 2025 1:17 pm

All times are UTC + 10 hours




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Electroplater in Sydney
PostPosted: Fri Jan 25, 2013 11:12 am 
Offline
1275cc
1275cc
User avatar

Joined: Sun Jan 21, 2007 9:16 pm
Posts: 3166
Location: North of the Harbour planning my next mini project
Looking for recommendations of electroplater in Sydney who can replate a bucket of bits and bolts.
The place I have used previously only do individual parts by wire wrapping and are a bit expensive

_________________
1969 Cooper "S"
1967 Mini Deluxe
1973 Clubman Van (the fleet spare)
1978 ex 1275 LS ("Wizard" Eaton Supercharged) :)
2015 HSV GenF GTS(occasional drive & tow car)
2019 MINI F55 Cooper S


Top
 Profile  
 
 Post subject: Chrome
PostPosted: Fri Jan 25, 2013 12:31 pm 
Offline
848cc
848cc
User avatar

Joined: Sat Jun 04, 2011 10:38 am
Posts: 359
Location: MinisintheGong [Somewhere on the South Coast]
Enware are in Caringbah (Ned 9525 9511), but I havent had anything done there. Next time i will try them.

Last I usedPioneer Plating (Tony 9734 6609 or 0433 356 482) at Liverpool with fair service, but BE WARNED, he never returns calls and rarely answers his mobile. Service 5/10 - work 8/10.

_________________
..still waiting for the Italian Job sequel to see if the bus went down :-) :-)


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 25, 2013 12:44 pm 
Offline
religious status
religious status
User avatar

Joined: Fri Mar 19, 2004 6:19 pm
Posts: 39754
Location: near Baulkham Hills, NSW
Try these guys,

Elite Plating

Address: 113 Woodpark Rd, Smithfield NSW 2164
Phone: (02) 9892 1692

They do barrel plating of zinc, either silver or gold finish. They go by weight.

I've not used them but my mate Richard did recently. He said their pricing was good too. :wink:

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R. :mrgreen:


Last edited by drmini in aust on Fri Jan 25, 2013 1:07 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Fri Jan 25, 2013 12:54 pm 
Offline
The Mini King
User avatar

Joined: Mon May 21, 2007 7:20 pm
Posts: 1338
Location: Windsor, NSW
michaelb wrote:
Looking for recommendations of electroplater in Sydney who can replate a bucket of bits and bolts.
The place I have used previously only do individual parts by wire wrapping and are a bit expensive


Try A & G Plating Pty Ltd Phone 02 97592848 These people do Barell plating, And that is what You Need
I notice that they refer to it as Zinc Plating: Bright and Dichromate
Bright = Blue Dichromate = orange ( in fact they are both dichromate finishes )

_________________
" A Hundred Years From Now It will not Matter what my Bank Acount Was,
The Sort Of House I Lived in, Or The Kind Of Car I drove ... But The World May Be A Better Place
Because I was Once Important In The Life Of A Child"


Top
 Profile  
 
 Post subject:
PostPosted: Fri Jan 25, 2013 2:44 pm 
Offline
1275cc
1275cc
User avatar

Joined: Sun Jan 21, 2007 9:16 pm
Posts: 3166
Location: North of the Harbour planning my next mini project
Thanks John, you are the second person to advise of A&G at Belmore.

_________________
1969 Cooper "S"
1967 Mini Deluxe
1973 Clubman Van (the fleet spare)
1978 ex 1275 LS ("Wizard" Eaton Supercharged) :)
2015 HSV GenF GTS(occasional drive & tow car)
2019 MINI F55 Cooper S


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jan 27, 2013 7:44 am 
Offline
998cc
998cc
User avatar

Joined: Thu Sep 23, 2004 2:24 pm
Posts: 1170
Location: Quakers Hill - Only the Hills
Michael,

Try Artarmon Electroplaters, I used them years ago as I did my apprenticeship over the road, they were pretty good.

Grant

_________________
Image

100% Pure A Series Turbo
Morris - The Original RedBull Racing


Top
 Profile  
 
 Post subject:
PostPosted: Sun Jan 27, 2013 12:25 pm 
Offline
The Mini King
User avatar

Joined: Mon May 21, 2007 7:20 pm
Posts: 1338
Location: Windsor, NSW
Boostedmini wrote:
Michael,

Try Artarmon Electroplaters, I used them years ago as I did my apprenticeship over the road, they were pretty good.

Grant


From what I understand they are very good at what they do, But I am told that they do not do barrel Plating, So ring them first to check

_________________
" A Hundred Years From Now It will not Matter what my Bank Acount Was,
The Sort Of House I Lived in, Or The Kind Of Car I drove ... But The World May Be A Better Place
Because I was Once Important In The Life Of A Child"


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC + 10 hours


Who is online

Users browsing this forum: No registered users and 92 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  

© 2016 Ausmini. All garage work involves equal measures of enthusiasm, ingenuity and a fair degree of irresponsibility.