Hope this helps
| ausmini https://www.ausmini.com/forums/ |
|
| mk1 wiper wiring https://www.ausmini.com/forums/viewtopic.php?f=2&t=80090 |
Page 1 of 1 |
| Author: | Minute [ Fri Jan 25, 2013 3:05 pm ] |
| Post subject: | mk1 wiper wiring |
hi all. have a 66 deluxe square body wiper motor which i need to wire to the switch. has a new wiring loom with green, red/green, black/green at the wiper end and red/green black/green, black at switch end. can i please get some help to what goes where? thanks |
|
| Author: | brett [ Fri Jan 25, 2013 4:35 pm ] |
| Post subject: | |
|
Hope this helps |
|
| Author: | brett [ Fri Jan 25, 2013 4:36 pm ] |
| Post subject: | |
It appears Green goes on top, |
|
| Author: | Convertible Mini [ Fri Jan 25, 2013 5:46 pm ] |
| Post subject: | Wiper motor wiring. |
All pins on the switch are numbered. Check the wiring diagram on a decent workshop Manual and it tells you which wire goes on which pin. Is your wiper motor a self park One ? |
|
| Author: | brett [ Fri Jan 25, 2013 5:57 pm ] |
| Post subject: | |
On new looms they seem to add more wiper motors than what was originally on them, self parking I presume... New looms are great to fit. |
|
| Author: | Minute [ Fri Jan 25, 2013 6:05 pm ] |
| Post subject: | |
that helps heaps! now i just need a photo of the wiper motor itself too |
|
| Author: | MattE [ Fri Jan 25, 2013 6:27 pm ] |
| Post subject: | |
Check out this thread: http://www.ausmini.com/forums/viewtopic.php?t=71385 |
|
| Author: | Convertible Mini [ Fri Jan 25, 2013 6:31 pm ] |
| Post subject: | Here we go. |
WRONG WIPER MOTOR. Read the thread before posting photos and comments. It confused people. |
|
| Author: | MattE [ Fri Jan 25, 2013 6:39 pm ] |
| Post subject: | |
Very sorry. Not trying to mislead. |
|
| Author: | Minute [ Fri Jan 25, 2013 6:46 pm ] |
| Post subject: | |
sorry wrong motor.. anyone got a photo of their early motor? |
|
| Author: | brett [ Sat Jan 26, 2013 3:47 pm ] |
| Post subject: | |
I'm away till late Tuesday if no one has done it by then pm me |
|
| Author: | MiniBill [ Sat Jan 26, 2013 4:47 pm ] |
| Post subject: | |
I have a PDF for an Austin Mini 2 speed + Self Park , no idea if its the same as yours sorry as im a mini newbie  but your welcome to check it out just pm me your email address if you need it.
Cheers :Bill |
|
| Author: | brett [ Sat Jan 26, 2013 4:57 pm ] |
| Post subject: | |
No wrong this is non self parking being early.. |
|
| Author: | brett [ Sat Jan 26, 2013 5:31 pm ] |
| Post subject: | |
No wrong this is non self parking being early.. |
|
| Author: | drmini in aust [ Sat Jan 26, 2013 5:51 pm ] |
| Post subject: | |
wiper switch is #23, wiper motor is #22. edit- above diagram is for non- parking motor (850), if yours has parking, the wiring is different (12V goes direct to motor from the fuse). Here's the Deluxe one: 
wiper switch is #26, wiper motor is #25. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|