| ausmini https://www.ausmini.com/forums/ |
|
| adjusting hi los https://www.ausmini.com/forums/viewtopic.php?f=2&t=80172 |
Page 1 of 1 |
| Author: | my1293 [ Sat Feb 02, 2013 3:15 am ] |
| Post subject: | adjusting hi los |
hi mini peeps, just want to know how to adjust my ride height so im not so low low low.. thank you |
|
| Author: | Fiji [ Sat Feb 02, 2013 7:31 am ] |
| Post subject: | |
Assuming you have them fitted. 2 spanners / big shifters Count the threads when doing them out to get the height just right. I think about 3 finger btween your tyres and wheel arche is a good height. Doc mentioned a bit of grease between the nylon cut and ball is a good idea also some never seize or lubricate on the threads of the hi lo is a decent idea to prevent them seizing. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|