| ausmini https://www.ausmini.com/forums/ |
|
| Clutch questions https://www.ausmini.com/forums/viewtopic.php?f=2&t=80410 |
Page 1 of 1 |
| Author: | Minicooper70 [ Mon Feb 18, 2013 3:44 pm ] |
| Post subject: | Clutch questions |
Hi, currently rebuilding my engine 1342cc with cross flow head twin webbers need a new clutch diaphram and just comparing options http://www.minisport.com.au/prod308.htm http://www.minisport.com.au/prod175.htm being a cruiser/general road use car, just wondering should i go for the orange clutch having a worked engine or would the cooper s kit suit it better thanks, Craig |
|
| Author: | drmini in aust [ Mon Feb 18, 2013 3:49 pm ] |
| Post subject: | |
I would use the orange dot one. I use one in each of my motors. But set the clutch height properly- when all assembled, the diaphragm spring should be flat. Often these days you need to machine .040" or more off the 3 lugs of old backplates to achieve this. see http://www.minimania.com/article/153/Cl ... non-Verto_ for how and why this is important. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|