| ausmini https://www.ausmini.com/forums/ |
|
| Tie bar washers - why cup AND flat washers? https://www.ausmini.com/forums/viewtopic.php?f=2&t=80460 |
Page 1 of 1 |
| Author: | MattE [ Sun Feb 24, 2013 3:19 pm ] |
| Post subject: | Tie bar washers - why cup AND flat washers? |
Folks, Does anyone know why minis use both a cup and a flat washer next to each other at the tie bar end? See: http://www.minisport.com.au/prod1039.htm Is it really important to have that pair in there as illustrated? Thanks. Matt |
|
| Author: | drmini in aust [ Sun Feb 24, 2013 3:21 pm ] |
| Post subject: | |
Cup washer is needed to hold the rubber but is only thin crap, it will bend without the thicker flat one against it. |
|
| Author: | MattE [ Sun Feb 24, 2013 5:07 pm ] |
| Post subject: | |
Interesting that they didn't opt for a thick cup washer, and no flat washer! The bushes I just installed seem to spill out the sides of the cup washers - normal, or do I need bigger cup washers? |
|
| Author: | John Smidt [ Sun Feb 24, 2013 5:55 pm ] |
| Post subject: | |
MattE wrote: Interesting that they didn't opt for a thick cup washer, and no flat washer!
The bushes I just installed seem to spill out the sides of the cup washers - normal, or do I need bigger cup washers? They did and Mini King has them New old Stock |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|