Like I said I have the manual for that, Blunder what year and model car do you have
| ausmini https://www.ausmini.com/forums/ |
|
| anyone have wiring details for rover a/c carb type https://www.ausmini.com/forums/viewtopic.php?f=2&t=80560 |
Page 1 of 1 |
| Author: | Blunder [ Mon Mar 04, 2013 12:06 am ] |
| Post subject: | anyone have wiring details for rover a/c carb type |
Hi guys Anyone have details on the wiring for the a/c it is the all under dash type with the sandan controller Thanks |
|
| Author: | Kennomini [ Mon Mar 04, 2013 4:27 pm ] |
| Post subject: | |
What year and model Rover? I have a Haynes service and repair manual covering from 1969-2001. |
|
| Author: | Harley [ Mon Mar 04, 2013 4:48 pm ] |
| Post subject: | |
It'll be for the upto 1991 models. They wend EFI after that. The circuits for the 998cc cars with AC are rare, can't say I've noticed one before. |
|
| Author: | EST-071 [ Mon Mar 04, 2013 4:50 pm ] |
| Post subject: | |
I had that in my mini, what do you need to know? Cheers Pete |
|
| Author: | Blunder [ Tue Mar 05, 2013 1:18 am ] |
| Post subject: | |
Basically need to know what goes where... Lol Starting from scratch |
|
| Author: | PetenSoaf [ Tue Mar 05, 2013 12:05 pm ] |
| Post subject: | |
As far as I remember it's all pretty simple. . .signal from switch goes through the gas pressure sensor then into a relay. . .relay triggers the compressor and, I think, an idle-up solenoid on the carb. |
|
| Author: | Kennomini [ Tue Mar 05, 2013 9:47 pm ] |
| Post subject: | |
Like I said I have the manual for that, Blunder what year and model car do you have
|
|
| Author: | Convertible Mini [ Wed Mar 06, 2013 6:08 am ] |
| Post subject: | A/C wiring. |
[quote="PetenSoaf"]As far as I remember it's all pretty simple. . .signal from switch goes through the gas pressure sensor then into a relay. . .relay triggers the compressor and, I think, an idle-up solenoid on the carb.[/quote] and the condenser fan. This is very important to keep the heat and pressure down. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|