That was quick, Thanks Dave
| ausmini https://www.ausmini.com/forums/ |
|
| CE668 Cam Specs or Information https://www.ausmini.com/forums/viewtopic.php?f=2&t=80596 |
Page 1 of 1 |
| Author: | captainwaldopepper [ Wed Mar 06, 2013 3:45 pm ] |
| Post subject: | CE668 Cam Specs or Information |
My car has an 1100 motor with a CE668 cam in it and I'm trying to find a spec sheet for it I was told it was a Camtech cam but they have never heard of this code. Is anyone familiar with this cam or know what the specs are? Thanks Dave |
|
| Author: | sitnlo62 [ Wed Mar 06, 2013 3:53 pm ] |
| Post subject: | Re: CE668 Cam Specs or Information |
captainwaldopepper wrote: My car has an 1100 motor with a CE668 cam in it and I'm trying to find a spec sheet for it
I was told it was a Camtech cam but they have never heard of this code. Is anyone familiar with this cam or know what the specs are? Thanks Dave It is a Camshaft Engineering Cam CE668 is similar to a Wade 104. 25/65 for want of a better description Dave |
|
| Author: | captainwaldopepper [ Wed Mar 06, 2013 3:55 pm ] |
| Post subject: | |
That was quick, Thanks Dave
|
|
| Author: | drmini in aust [ Wed Mar 06, 2013 6:14 pm ] |
| Post subject: | |
I had a Wade 104 in Barney (1293A+) with Toyota Corolla 1.46 rockers and twin HS4s. It went OK, made 59.4HP ATW but there are much better cams for HP + torque about now, if you are going to grind one. |
|
| Author: | captainwaldopepper [ Wed Mar 06, 2013 7:18 pm ] |
| Post subject: | |
Thanks Doc, I wasn't going to do anything with the cam at the moment but I was a bit concerned that I didn't have any information on it. At least I have a starting point now. Cheers Dave |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|