ausmini
https://www.ausmini.com/forums/

Brake pedal won't come back up...
https://www.ausmini.com/forums/viewtopic.php?f=2&t=80637		 Page 1 of 1
Author:  Monster Mini [ Sat Mar 09, 2013 7:10 pm ]
Post subject:  Brake pedal won't come back up...
Brake pedal won't spring back up , brakes still work , wot u all think?
Ta
Author:  Convertible Mini [ Sat Mar 09, 2013 7:24 pm ]
Post subject: 
Errr, Brakes not working properly?
Author:  Mick [ Sat Mar 09, 2013 7:32 pm ]
Post subject: 
Take a look under the pedal box, there's a large wire wound spring which pulls the pedals back up.

Look at how the working clutch pedal is sprung, it is the same for the brake pedal.
Author:  MiniBill [ Sat Mar 09, 2013 7:46 pm ]
Post subject: 
Mick wrote:
Take a look under the pedal box, there's a large wire wound spring which pulls the pedals back up.

Look at how the working clutch pedal is sprung, it is the same for the brake pedal.


Thats a good answer listen to Mick , mine would have been have you tried it with your foot off :-) ........ yes a naughty nonsensical monty pythonesque post but its saturday and i have a bottle of wild turkey to tame :-)

Cheers Bill
Author:  Mick [ Sat Mar 09, 2013 7:47 pm ]
Post subject: 
MiniBill wrote:

Thats a good answer listen to Mick , mine would have been have you tried it with your foot off :-) ........ yes a naughty nonsensical monty pythonesque post but its saturday and i have a bottle of wild turkey to tame :-)

Cheers Bill


He's not the Messiah, he's a very naughty boy!
Author:  MiniBill [ Sat Mar 09, 2013 7:50 pm ]
Post subject: 
Mick wrote:
MiniBill wrote:

Thats a good answer listen to Mick , mine would have been have you tried it with your foot off :-) ........ yes a naughty nonsensical monty pythonesque post but its saturday and i have a bottle of wild turkey to tame :-)

Cheers Bill


He's not the Messiah, he's a very naughty boy!


Muhahaha , life of brian loved that movie back in the day.
Author:  frednutz&co [ Sat Mar 09, 2013 8:53 pm ]
Post subject: 
check the pivot pin the can get sticky and that is what happened to mine.
Author:  simon k [ Sat Mar 09, 2013 8:55 pm ]
Post subject: 
I replaced a broken spring for someone once.... long long time ago
Author:  Harley [ Sat Mar 09, 2013 10:48 pm ]
Post subject: 
I've got a couple of pedal boxes here where the grease on the pedal shafts is basically gone and the springs have lost their 'springyness' to the point where the pedals just stay where you put them - no cylinders connected!
Author:  peterb [ Sun Mar 10, 2013 7:16 am ]
Post subject: 
simon k wrote:
I replaced a broken spring for someone once.... long long time ago


Yeah, and you put you back out doing it, so no more.
Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/