| ausmini https://www.ausmini.com/forums/ |
|
| 1100 S harmonic balancer https://www.ausmini.com/forums/viewtopic.php?f=2&t=80697 |
Page 1 of 1 |
| Author: | Kennomini [ Wed Mar 13, 2013 4:25 pm ] |
| Post subject: | 1100 S harmonic balancer |
Is it safe to use a small bore harmonic balancer on an 1100S engine 
The engine will be either 0.40 or 0.60 thou over bore and crank is large journal 0.10 or 0.20 thou over on the journals and large journal rods. Or should I get a cooper S balancer? |
|
| Author: | TheMiniMan [ Wed Mar 13, 2013 5:39 pm ] |
| Post subject: | |
its the same part, same part number too |
|
| Author: | drmini in aust [ Wed Mar 13, 2013 6:24 pm ] |
| Post subject: | |
Just make sure the rubber bonding is OK if it's s/h. Run a razor blade around the back to clean it off flush, if rubber isn't cracked then it's a good 'un. 
|
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|