| ausmini https://www.ausmini.com/forums/ |
|
| cosworth pistons? turbo rods? https://www.ausmini.com/forums/viewtopic.php?f=2&t=80721 |
Page 1 of 1 |
| Author: | Minute [ Sat Mar 16, 2013 9:59 am ] |
| Post subject: | cosworth pistons? turbo rods? |
is there such a thing as cosworth forged pistons? and turbo rods? |
|
| Author: | mini13 [ Sat Mar 16, 2013 10:01 am ] |
| Post subject: | |
cosworth have made pistons for the A series, ( and most other engine). turbo rods are just normal generic A+ rods. |
|
| Author: | TheMiniMan [ Sat Mar 16, 2013 10:50 am ] |
| Post subject: | |
the A+ "Turbo" rods are a specific rod,,, not the same as std rods they "look" like std A+ rods but are slightly different , easy identified because they have their part number goes right the way up the whole length of the rod ... & are made of a slightly better material than the std rod |
|
| Author: | Minute [ Sat Mar 16, 2013 5:57 pm ] |
| Post subject: | |
is the a+ rod the one with the massive weight hanging off the big end cap? do you have a p/n for an a+ turbo rod? and a p/n for a normal a+ rod? |
|
| Author: | drmini in aust [ Sat Mar 16, 2013 6:09 pm ] |
| Post subject: | |
No, the heavy one with lumps is the last of the A series (eg late Morris 1100S, Morris 1300 auto, Mini 1275LS) Std A+ rods are not bad for most purposes. They are lighter than both the 1100S lumpy ones and Cooper S rods. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|