Will wind up window doors from a deluxe fit in a 850 shell?

Can't recall if I read the locks & B pillar were different, or is that only for a clubby

It'll fit, won't be perfect but will work.

swap over the nylon buffer with the metal cup,
or vice versa

_________________
No offence intended here but--> anyone writing a book about minis 30 years ago may not have experienced such worn or stuffed-with components as we are finding these days.

You should put your heart & soul into everything you do.

Use windup & later door rubbers (wider) not the 850 ones.

_________________
DrMini- 1970 wasaMatic 1360, Mk1S crank, 86.6HP (ATW) =~125 @ crank, 45 Dellorto (38 chokes), RE282 sprint cam, 1.5 rockers, 11.0:1 C/R.

On the 850 the nylon is on the door and the metal cup is on the Body, On the deluxe the metal cup is on the door and the nylon is on The body, Take note The cups and the nylon
on the deluxe are larger than the ones fitted to the 850
If You have a good set of sliding window doors do not throw them out

_________________
" A Hundred Years From Now It will not Matter what my Bank Acount Was,
The Sort Of House I Lived in, Or The Kind Of Car I drove ... But The World May Be A Better Place
Because I was Once Important In The Life Of A Child"

Or do throw them out, just let us know where you dump them!