ausmini
https://www.ausmini.com/forums/

wind up doors on an 850
https://www.ausmini.com/forums/viewtopic.php?f=2&t=80838
Page 1 of 1

Author:  junior [ Mon Mar 25, 2013 4:25 pm ]
Post subject:  wind up doors on an 850

Will wind up window doors from a deluxe fit in a 850 shell?

Can't recall if I read the locks & B pillar were different, or is that only for a clubby

Author:  Harley [ Mon Mar 25, 2013 4:52 pm ]
Post subject: 

It'll fit, won't be perfect but will work.

Author:  TheMiniMan [ Mon Mar 25, 2013 5:03 pm ]
Post subject: 

swap over the nylon buffer with the metal cup,
or vice versa

Author:  drmini in aust [ Mon Mar 25, 2013 5:25 pm ]
Post subject: 

Use windup & later door rubbers (wider) not the 850 ones.

Author:  John Smidt [ Mon Mar 25, 2013 6:00 pm ]
Post subject: 

On the 850 the nylon is on the door and the metal cup is on the Body, On the deluxe the metal cup is on the door and the nylon is on The body, Take note The cups and the nylon
on the deluxe are larger than the ones fitted to the 850
If You have a good set of sliding window doors do not throw them out

Author:  69k1100 [ Mon Mar 25, 2013 6:12 pm ]
Post subject: 

Or do throw them out, just let us know where you dump them!

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/