ausmini
https://www.ausmini.com/forums/

Help ID a dodgy compliance plate
https://www.ausmini.com/forums/viewtopic.php?f=2&t=80967
Page 1 of 1

Author:  miniRock [ Fri Apr 05, 2013 10:36 am ]
Post subject:  Help ID a dodgy compliance plate

Hi guys,
So finally got home to the mini after working 3 weeks straight. :x
need some help identifying the compliance plate because I can't read it properly but best I can see it says:
YMA2S2
30910
9YA75A/V17
32039
1/SNOW WHITE/1

on top of the radiator shroud (30364):
Image

and a pic of the bogged up beast:
Image

Thanks guys

Author:  MiniBill [ Fri Apr 05, 2013 11:22 am ]
Post subject: 

Hey Minirock.

YMA2S2 is a Morris Mini Deluxe body and 9YA ..... is a 998cc, as for the year ....... i dont know but some here will be able to narrow it down

Edit after a bit of a search snow white paint says 1967
Cheers bill

Author:  Rob1970 [ Fri Apr 05, 2013 11:44 am ]
Post subject: 

There should be a body number near the compliance plate as well that matches the compliance plate.
Just noticed the front panel looks to be the same as Cooper S.
Diagonal brace and section to mount oil cooler, may have had some front panels replaced.

Cheers Rob

Author:  simon k [ Fri Apr 05, 2013 12:35 pm ]
Post subject: 

the numbers on that plate look perfectly legit - the car number on the ID plate should be about 500 higher than the body number on the radiator shroud, which it is (546 is close enough - body may have been forgotten in a corner for a little while before going on the production line)

Rob1970 wrote:
Just noticed the front panel looks to be the same as Cooper S.
Diagonal brace and section to mount oil cooler, may have had some front panels replaced.

Cheers Rob


definitely only replaced, don't go thinking it's an S because of those panels!

Author:  miniRock [ Fri Apr 05, 2013 2:23 pm ]
Post subject: 

awesome thanks for that guys, at least I have a good idea of the body although it has got a clubby interior and a 1100cc engine in it
Image

not sure if it's an A series though

just defiantly a bitsa

Author:  drmini in aust [ Fri Apr 05, 2013 2:35 pm ]
Post subject: 

Yep it's a 1098 from a Leyland Mini. A series... we never got A+ here, except in a few very late Mokes.

Author:  miniRock [ Fri Apr 05, 2013 5:39 pm ]
Post subject: 

thanks for all your help guys

Page 1 of 1 All times are UTC + 10 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/