| ausmini https://www.ausmini.com/forums/ |
|
| Any ideas on how to fit window regulator roller back in? https://www.ausmini.com/forums/viewtopic.php?f=2&t=80988 |
Page 1 of 1 |
| Author: | BBY755 [ Sat Apr 06, 2013 5:32 pm ] |
| Post subject: | Any ideas on how to fit window regulator roller back in? |
Have managed to get window regulator working again without taking out quarter vent window, BUT can't get roller into channel ...... Does anyone have any ideas? Thanks in advance...... |
|
| Author: | winabbey [ Sat Apr 06, 2013 6:33 pm ] |
| Post subject: | |
Have you read these? http://www.ausmini.com/forums/viewtopic.php?t=60640 http://www.ausmini.com/forums/viewtopic.php?t=69906 |
|
| Author: | BBY755 [ Sat Apr 06, 2013 7:08 pm ] |
| Post subject: | |
Thanks, Checked them out as soon as I decided to fix the broken winder. Didn't want to remove all windows if possible, so detached regulator from the mounting, and managed to get it working - seems just jammed for whatever reason. Found that there is a pivot plate that can be moved when you take out the 3 screws, so gave that a try and figured worst case, remove all windows as per posts if necessary. I managed to unmount the pivot plate and set the roller in the track and re-assembled and lubricated everything. Works perfectly and saved heaps of work, so might be a useful tip for anyone with the same problem. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|