| ausmini https://www.ausmini.com/forums/ |
|
| Engine Rebuilders preferably in Canberra https://www.ausmini.com/forums/viewtopic.php?f=2&t=81180 |
Page 1 of 1 |
| Author: | dtorreal [ Mon Apr 22, 2013 8:23 am ] |
| Post subject: | Engine Rebuilders preferably in Canberra |
Hi All I was wondering if anybody had experience rebuilding a mini engine in Canberra. She's just a little tired and smoky but good compression. In general i would like a compete rebuild to freshen her up. Happy to hear about Sydney experiences so long as its on the south side. Thanks |
|
| Author: | 9YaTaH [ Mon Apr 22, 2013 3:49 pm ] |
| Post subject: | |
Give this lot a call and see how they shape up...I haven't heard anything bad about them (fingers crossed) Engine Rebuilders 59 Heffernan St, Mitchell ACT 2911, Australia Phone number(02) 6242 6000 |
|
| Author: | MINImal effort [ Wed Apr 24, 2013 12:00 am ] |
| Post subject: | |
Another one is Phillip Head Services in Woden. 3 Salamander Ct Phillip ACT 2606 (02) 6282 5555 http://phillipheadservices.com.au/ I've had work done there on a few occasions over the years. ... and they repaired and rebuilt my race motor for me when I had a cam follower failure... |
|
| Author: | MattE [ Sat Apr 27, 2013 8:49 pm ] |
| Post subject: | |
We've had only good times with Belconnen Engine Centre. There was also a guy from an engine shop in Queanbeyan who I understand was quite keen to work with A series engines - I think he did a talk or two for the ACT Mini Car Club a few years ago. Someone else might chip in with the business name. |
|
| Author: | Rob1970 [ Sat Apr 27, 2013 10:11 pm ] |
| Post subject: | |
I've used both Queanbeyan Engine Service and Engine Rebuilders for machine work on A series and was more than happy with their work. I've also had Phillip Heads do both heads and cranks in the past and would use them again without hesitation. Best to ring around and build to your budget. Cheers Rob. http://www.classiccargurus.com.au/Queanbeyan_Engine_Service |
|
| Author: | 9YaTaH [ Wed May 08, 2013 4:40 pm ] |
| Post subject: | |
MattE wrote: We've had only good times with Belconnen Engine Centre.
There was also a guy from an engine shop in Queanbeyan who I understand was quite keen to work with A series engines - I think he did a talk or two for the ACT Mini Car Club a few years ago. Someone else might chip in with the business name. That was probably Terry from QIM....he has/had a Mini himself...or way back it could have been someone from BERCO but the principle Mini protagonist there has retired. |
|
| Page 1 of 1 | All times are UTC + 10 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|